[RESOLVED] FTP Problem with Xbox Original

[alexeymakarov]

After a month i cant use my FTP connection and i dont know why, i have tried all ways i know but helpless.

My Xbox IP is 192.168.0.3

Cable connected to network PCI card Realtek (DHCP auto settings)

tried to ping this IP using cmd but it shows evey time that this adress is not available
tried change IP to another - nothing
tried change network PCI adapters - nothing

Firewall if off

i dont know what it is and why it is.

i use same settings what i have used about a month ago when upload game to the xbox.

by the way - wether plugin does not work to. i hope you help me with this.

[tim619]

Try the following: go to network settings on your pc, than change dhcp to static values and use the same values you entered on your xbox app except the ip should be slightly different on last number. If that does not work launch evox setup new ftp connection and try again with static settings as said. If you are on windows this should work on linux i got problems too, although right settings.

[alexeymakarov]

Yep. Thanks. I have tried it yesterday hour after posting and it worked!

Xbox IP: 192.168.0.3
Gateway: 192.168.0.1
DNS: 192.168.0.1

PC: 192.168.0.1
DNS: 192.168.0.1

Thats all.

[darkace]

I've tried everything and still cant connect to my og xbox ,i am running the endgame softmod setup with a modchip (unknown type) when i am connented with a cable running from my laptop to my xbox (network is set to DHCP the current ip is 0.0.0.0)(when network is set to static curent ip is 192.168.1.99) my lap top is running on windows 7 os, i have tried filezzilla and flashfxp

[zukote1991]

Hey, sounds frustrating. Since your Xbox IP isn’t responding to ping, one thing to check is whether the Xbox is actually getting that IP from your network. Boot into your dashboard and double-check the network settings—sometimes the IP can change if your router’s lease expired or DHCP reassigned it. Also try using a crossover Ethernet cable directly from your PC to the Xbox (if you aren’t already), and make sure your FTP client is set to passive mode. Hope that helps!