Xbox not working

If you need any help with XBMC4XBOX, such as installing or using the software, please post it in here.
Post Reply
Nightmare
Posts: 3
Joined: Mon Sep 03, 2012 10:13 am

Xbox not working

Post by Nightmare »

Nephew yanked this metalic peice on back of xbox and it hasn't worked since, anyone know what to do.
Yes it is modded with EvoX.
http://i48.tinypic.com/14id192.jpg
User avatar
professor_jonny
Posts: 1298
Joined: Thu Jul 05, 2012 5:41 am
Location: New Zealand
Has thanked: 66 times
Been thanked: 196 times

Re: Xbox not working

Post by professor_jonny »

it's out side coating the cable is metal it could of shorted on the motherboard somewhere and broken it ?

but it could of just pulled one of the wires off the board ?

that cable is the programmer for the modchip to plug into your pc you shuld not need to use it if it were removed the xbox shuld still go.

we need to know more to help you tho ie:

Does it power up lights flash etc...?

What colours does it flash if so?

Does it come up with an error code on the screen etc...?

Also a better picture might help of the area where the chip is soldered to on the motherboard and of the chip as it is barley visable at the moment.
Nightmare
Posts: 3
Joined: Mon Sep 03, 2012 10:13 am

Re: Xbox not working

Post by Nightmare »

will work on better pics.
After start up it flashes red and green and gives the send back to company screen.
User avatar
professor_jonny
Posts: 1298
Joined: Thu Jul 05, 2012 5:41 am
Location: New Zealand
Has thanked: 66 times
Been thanked: 196 times

Re: Xbox not working

Post by professor_jonny »

does it come up with the words superfro at the top and a list of numbers down the side with a whole lot of fault codes and the descriptions?

if not it sounds like it is not booting from the chip as if it were a hacked bios it would have a hacked error screen i believe they all have the same error screen.

the d0 wire may of come off but we do need better pictures.
Nightmare
Posts: 3
Joined: Mon Sep 03, 2012 10:13 am

Re: Xbox not working

Post by Nightmare »

OK working on them, I should have them up by tommorow.
Post Reply