HELP ME PLEASE

If you need any help with XBMC4XBOX, such as installing or using the software, please post it in here.
Post Reply
godzillanator
Posts: 5
Joined: Sat Dec 13, 2014 4:52 pm

HELP ME PLEASE

Post by godzillanator »

I updated my Xbox to 3.5 earlier today, it installed correctly but I couldn't set it as the default dash so I just booted into 3.3.3 and from there into file manager then into 3.5 until I tried to play a game that I burned (most of my games are burned) the game wouldn't load it said DVD so I just tried another game, no look. At this point I knew something was wrong and I set into the settings and I messed something up and now I can't get the xbox to connect to the TV,the xbox turns on but the lights are orange and theres no signal on the TV.
godzillanator
Posts: 5
Joined: Sat Dec 13, 2014 4:52 pm

Re: HELP ME PLEASE

Post by godzillanator »

UPDATE: I've luckily have a stock Xbox (my one from when I was younger) and I tried that and it didn't work so I wiggled around the AV cable and it flickered. I'll try it on my Soft Modded Xbox now, fingers crossed.
godzillanator
Posts: 5
Joined: Sat Dec 13, 2014 4:52 pm

Re: HELP ME PLEASE

Post by godzillanator »

ANOTHER UPDATE: I got the Signal working, but the burned disks aren't working :(
fxmech
Posts: 673
Joined: Wed Aug 01, 2012 9:15 am
Has thanked: 37 times
Been thanked: 46 times

Re: HELP ME PLEASE

Post by fxmech »

XBMC shouldn't have any effect on whether a DVD backup plays.

Did you change anything else? Are you softmod or otherwise?
godzillanator
Posts: 5
Joined: Sat Dec 13, 2014 4:52 pm

Re: HELP ME PLEASE

Post by godzillanator »

It's soft modded, it won't even play original copies, is there any way to just completely reset XBMC? thanks for replying!
User avatar
Oldxboxusa
Posts: 145
Joined: Tue Aug 28, 2012 5:47 pm
Has thanked: 14 times
Been thanked: 3 times

Re: HELP ME PLEASE

Post by Oldxboxusa »

It depends not with xbmc. It is a soft mod based problem. When xbmc loads press both thumb sticks to go into recovery (I mean this is the combination for it) I have never tested it before.
godzillanator
Posts: 5
Joined: Sat Dec 13, 2014 4:52 pm

Re: HELP ME PLEASE

Post by godzillanator »

Oh god I feel like such a noob it was the optical drive, I put the one from my old xbox in it and it worked grand, Can I put any optical drive in it or does it have to be specific because i want to put one from an old pc in it.
User avatar
Rocky5
Posts: 975
Joined: Sat Feb 08, 2014 5:27 am
Has thanked: 101 times
Been thanked: 257 times

Re: HELP ME PLEASE

Post by Rocky5 »

You can put any IDE dvd drive into the Xbox set to slave.

There are drawbacks to doing so.

Original games will no longer function.
Doesn't look as nice unless you stick the original tray front onto the new drive.

The PC drive will read burnt media fine.

Also note there are specific drive that can be flashed to read originals. (Also requires, on one at least, reversing the drawer open motor)
I have two of these drives.
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod


Xbox Gamertag = Connxtion
PSN ID = JCRocky5
Post Reply