In the days of the previous website/forum (run by Craig), there was a thread containing a discussion between myself and Heimdall walking through the process of using HeXEn to flash a non-default (i.e. not on the HeXEn disc) BIOS onto an STMicro TSOP - I think using the "3.3 Winbond Flash" option (viz Resctoox).
I want to do this again with a v1.1 containing an STMicro TSOP, into which I've already successfully flashed a default BIOS using "3.2 TSOP Flash (not Winbond)", in order to put a customised M8+ in there.
Anyone else done this? ...or is Heimdall around to advise again?
Using HeXEn to flash TSOP with non-default BIOS
-
spicemuseum
- Posts: 906
- Joined: Mon Jul 09, 2012 11:08 pm
- Has thanked: 94 times
- Been thanked: 75 times
-
MrMajst3r
- Posts: 219
- Joined: Wed Jul 18, 2012 10:35 am
- Location: Poland
- Has thanked: 10 times
- Been thanked: 32 times
- Contact:
Re: Using HeXEn to flash TSOP with non-default BIOS
You need Gentoox Loader or EvolutionX.
http://www.eurasia.nu/modules.php?name= ... ader_v6.07
http://www.eurasia.nu/modules.php?name= ... Build_3935
For Gentoox Loader, put bios file in C:\bios. For EvolutionX, put bios file in "BIOS" folder, inside EvolutionX directory.
http://www.eurasia.nu/modules.php?name= ... ader_v6.07
http://www.eurasia.nu/modules.php?name= ... Build_3935
For Gentoox Loader, put bios file in C:\bios. For EvolutionX, put bios file in "BIOS" folder, inside EvolutionX directory.
