Question about X3 red cable

Discussion about Modding the XBOX, including hardware and software hacks.
Post Reply
User avatar
AwesomeNurd
Posts: 332
Joined: Mon Jul 30, 2012 3:01 pm
Location: London, United Kingdom
Has thanked: 22 times
Been thanked: 10 times

Question about X3 red cable

Post by AwesomeNurd »

Hi, I have a spare X3 modchip which was on a 1.6 console, I want to install it on a 1.1 console, so I need to boot into the the backup bios and flash it with the right bios from LAN, the problem is I don't have the red cable that goes from the chip to the X3 Eject/Power pcb. I am wondering if this cable can be found or if it's a standard cable that I can buy anywhere like eBay etc...

Thank you.
User avatar
Nextelhalo
Posts: 725
Joined: Wed Jul 04, 2012 5:55 am
Location: Yoyorast Island
Has thanked: 61 times
Been thanked: 77 times

Re: Question about X3 red cable

Post by Nextelhalo »

I have a spare but i'm across the pond from you :( You could always flash it for the 1.1 (while it's installed on the 1.6) via hard drive or disc. Take it off when your done an slap it onto the 1.1 .
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
Post Reply