DVD Problem

If you need any help with XBMC4XBOX, such as installing or using the software, please post it in here.
Post Reply
Stef2012
Posts: 10
Joined: Wed Oct 10, 2012 12:01 pm

DVD Problem

Post by Stef2012 »

Recently I've had a problem with XBMC where inserting a DVD will cause XBMC to hang with the spinning 'waiting' box in the bottom corner.

Here's the debug log:
http://pastebin.com/FywuSaVv

Any ideas?
User avatar
bigkidoz
Posts: 640
Joined: Thu Jul 12, 2012 4:33 am
Location: Melbourne, Australia.
Has thanked: 19 times
Been thanked: 35 times

Re: DVD Problem

Post by bigkidoz »

Dying dvd drive.
Sent from my android coz apple is for pie.
Stef2012
Posts: 10
Joined: Wed Oct 10, 2012 12:01 pm

Re: DVD Problem

Post by Stef2012 »

That was my initial thought, However it was still doing it with a known working drive in it & it started doing the same thing on my other 2 modded xboxes when I put one of the latest nightly builds on it.

I went back to the last stable build (3.2) on one of them & havn't had the problem on that since.


When the problem occurs, Upon restarting the xbox with the disc in the drive everything works fine & I've had no other disc/drive related problems.
User avatar
BuZz
Site Admin
Posts: 1891
Joined: Wed Jul 04, 2012 12:50 am
Location: UK
Has thanked: 66 times
Been thanked: 423 times
Contact:

Re: DVD Problem

Post by BuZz »

Stef2012 wrote:That was my initial thought, However it was still doing it with a known working drive in it & it started doing the same thing on my other 2 modded xboxes when I put one of the latest nightly builds on it.

I went back to the last stable build (3.2) on one of them & havn't had the problem on that since.
Anything but the stable builds should be considered "in development". I do not recommend any nightly builds are used for day to day use.
Stef2012
Posts: 10
Joined: Wed Oct 10, 2012 12:01 pm

Re: DVD Problem

Post by Stef2012 »

To update, Went back a few builds & discovered that Build 'r31602' is the last one I didn't encounter this problem on.

Everything that was released after that build seems to suffer from the problem I described in my original post.

So since its all working, I'll be sticking with that build until the next stable build comes along.
Post Reply