I last used it in February, tsopped it and played burnout was the last I did.
No error on screen.
Xbox frag after sitting 5 months
-
sixties keith
- Posts: 535
- Joined: Wed Aug 01, 2012 9:30 am
- Has thanked: 28 times
- Been thanked: 33 times
Re: Xbox frag after sitting 5 months
have you checked the capacitors to see if any are leaking or bulging? i noticed in a few of mine with no error screen that it was usually this that caused it and as a result have quite a few knocking about broken 
120gb hdd, vinyl magma skin, front lights, side strip lights, clear jewel mod with lights, ir dongle mod, hdd indicator. X3 with LCD many mods inc custom x3 jewel.
-
sixties keith
- Posts: 535
- Joined: Wed Aug 01, 2012 9:30 am
- Has thanked: 28 times
- Been thanked: 33 times
Re: Xbox frag after sitting 5 months
check all the caps not just the ones around where the clock cap is located. also what was in like inside when you opened it up after storage, sometimes a good clean can work wonders too. theres at least a few of the xboxs ive got not working only to clean them and there working again
120gb hdd, vinyl magma skin, front lights, side strip lights, clear jewel mod with lights, ir dongle mod, hdd indicator. X3 with LCD many mods inc custom x3 jewel.
-
xman
- Posts: 1289
- Joined: Wed Jul 04, 2012 2:30 pm
- Location: Sydney, Australia
- Has thanked: 55 times
- Been thanked: 168 times
Re: Xbox frag after sitting 5 months
Fragging......What is it doing LED warning wise. The patterns that the machine sends out helps with diagnosing the problem. Before ripping apart the machine, always check that the AVI cable is fully plugged into the machine by the way. Most bioses will detect this plug not being fully inserted and send out a "frag signal".