The manufacturer O2X modification was only in business for less than a year and a total of less then 200 cases were ever produced in total. There was 3 styles of these cases that were made and this was the very last and least produced version. This version was made for the X3 mod chip and came with the XLCD and extended wires for the X3 mod chip. If you have more info of this case PM me! There is almost no info left on these cases and I cant find any info at all on this model!
When I first got this case it was a total wreck and missing all of the mounting hardware. It was also missing the original IDE cables and needed to be completely rewired. Lucky all of the custom wires that were made for the controller ports and the DVD drive were there but all of the power wiring and IDE cables had to be made from scratch. Basicly all of the black wiring is original and all of the other wiring I had to make up from pictures and know how. All of the hardware was changed also to allen (hex) bolts. As you can see it came out better than it was made originally. I still need to redo the IDE cables. This was the first set that I made with standard 40 wire cables and I plan to redo then again with 80 wire IDE cables. This also did not come with the hitachi 8164 DVD drive. It had a broken standard XBOX DVD drive. So basicly all I used was the bare case itself!
Version 1.4 motherboard
128 RAM upgrade
X3CE mod chip
XLCD
(3) 750 gig IDE PATA hard drives ST3750640A
Hitachi GDR-8164B PC DVD drive converted for the XBOX
