Well started her up this morning and it booted to unleash x, loaded hexen and installed xbmc, used hexen to set xbmc to default dash, rebooted and its perfect. Just going to ftp to 3.5.1 now and should be all set! Man that disc makes like so easy. Can that disc be usedwithout splinter cell on a completely stock xbox to do everything?
Only weird thing I am seeing now is I installed a 200gb HDD and I'm seeing about 5gb at E and about 120gb at F. Where's the other 75ish gigs go?
TSOP now going backwards
-
Heimdall
- Posts: 331
- Joined: Thu Jul 05, 2012 6:43 pm
- Location: UK
- Has thanked: 4 times
- Been thanked: 45 times
Re: TSOP now going backwards
The other space is in G:\. If you want a single F then you have to run XBPartitioner and reformat F and G. On HeXEn you have to do that manually - boot normally, put the HeXEn DVD in the drive, browse to D:\Apps\XBPartitioner\default.xbe, then once XBPartitioner is loaded you use the A button to cycle through the four preset options.
Unfortunately none of the boot discs can run on an unmodded Xbox.
Unfortunately none of the boot discs can run on an unmodded Xbox.
-
Heimdall
- Posts: 331
- Joined: Thu Jul 05, 2012 6:43 pm
- Location: UK
- Has thanked: 4 times
- Been thanked: 45 times
Re: TSOP now going backwards
Only if the G partition is full 
When you rebuilt the disk, towards the end of the rebuild HeXEn will have given you some instructions, then launched XBPartitioner. Did you select All F, or F and G when you ran XBPartitioner?
When you rebuilt the disk, towards the end of the rebuild HeXEn will have given you some instructions, then launched XBPartitioner. Did you select All F, or F and G when you ran XBPartitioner?
Re: TSOP now going backwards
I recall selecting all F because I didn't see much need for extra partitions.