Controller ports

chunk1982 · Post by **chunk1982** » Thu Sep 12, 2013 2:49 pm

Are the internal controller ports interchangeable between xbox version's as in would the ports from a 1.0/1.1 plug straight in and work on a 1.4?

All th best

Paul

nidge · Post by **nidge** » Thu Sep 12, 2013 3:19 pm

chunk1982 wrote:Are the internal controller ports interchangeable between xbox version's as in would the ports from a 1.0/1.1 plug straight in and work on a 1.4?

All th best

Paul

1.0 has a daughterboard.
Found out recently that the other versions have cables of different lengths. So athough they are the same, they just won't reach the mobo.

AwesomeNurd · Post by **AwesomeNurd** » Thu Sep 12, 2013 4:11 pm

1.1 are longer than the 1.6

PS: nidge, do you still have that 1.1 controller port??

nidge · Post by **nidge** » Thu Sep 12, 2013 4:39 pm

AwesomeNurd wrote:1.1 are longer than the 1.6
PS: nidge, do you still have that 1.1 controller port??

I think so? I will check later

chunk1982 · Post by **chunk1982** » Thu Sep 12, 2013 6:39 pm

Thanks guys I already took the plunge and removed the inners from one port and fitted/soldered a usb in there will post some pics shorlty

All the best

Paul

chunk1982 · Post by **chunk1982** » Thu Sep 12, 2013 7:23 pm

This will be going in the port next to it

which brings me to my next question does anyone know where i can buy a small bit of very dark green transparent plexi type stuff in the uk?

all the best

paul

dan.h · Post by **dan.h** » Thu Sep 12, 2013 10:31 pm

I was thinking of doing a dvd mod like that and thought about using the plastic lens from a pair of sunglasses to cover the port. Not sure how well the plastic would take to being fettled down to size but you can pick up a pair for 50p in wilksinsons etc. and try it out

chunk1982 · Post by **chunk1982** » Thu Sep 12, 2013 11:02 pm

Thats not a bad idea will have a look next time im out and about

All the best

Paul

AwesomeNurd · Post by **AwesomeNurd** » Mon Oct 14, 2013 10:09 pm

I have a dead 1.1 motherboard, I was wondering if I can desolder the controller ports from it and solder them into another spare working v1.0 motherboard, I actually don't have a 1.0 controllers ports, but I do have 1.1-1.6 ones, so my question is: will this work if I remove the 1.0 connectors on the mobo and replace them with 1.1 ones?

asbo · Post by **asbo** » Tue Oct 15, 2013 10:14 am

The xbox 1.0 has a daughter board the controller ports plug into, if you don't have one of those you need to get one before you can connect any controller ports.

Controller ports

Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports

Re: Controller ports