Hi everyone, I received a joblot, there is a motherboard with a ram upgrade and in the bottom there is a switch soldered to 3 points, I wonder what is it? There is also a component that is missing, I took a picture of it. I also don't know what is it
Its either a switch to enable the write points for tsop flashing or switching banks on a 1mb bios, i notice only half of the ram upgrade was completed.
The ram chips are soldered on the top as well, I just didn't take a picture of it. Do you know what is the component missing? I want to try to desolder the same from the other mobo and solder it in the 128mb mobo and try to see if it works.
Is it just me or are those two different boards i see? One has extra RAM soldered in and one does not................
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
AwesomeNurd wrote:The ram chips are soldered on the top as well, I just didn't take a picture of it. Do you know what is the component missing? I want to try to desolder the same from the other mobo and solder it in the 128mb mobo and try to see if it works.