help ! xbox powers up when Plugged in

[ltdanno360]

hey guys im over my head a bit so heres the situation
i got an xbox its a 1v2,1v3 xbox
it has a foxlink power supply
( checked and resoldered in good working condition )

when i plug the power cord into the xbox it Turns On automatically The Power switch on the front of the xbox doesnt DO ANYTHING when pressed
i replaces it with a diffrent switch and still doesnt work
i would like to fix this problem currently have the motherboard out of the xbox and have cleaned some of the traces on the front bottom of the xbox but it didnt help is it possible i can solder in some wires and if so from were ?
i seen alot of pics but not really sure if its the right thing or not i could use a good tutorial /pics
my goal is to fix it cause i really want to flash this xbox (tsop)

things i have to test , clean and fix it with ..
Multimeter ..
rubbing alcohol
q tips
small gauge wires
solder and flux
15/20 watt hobby soldering iron

here are some pics i took




[imghttp://img17.imageshack.us/img17/390/z6w7.jpg][/img]

[MrMajst3r]

Solder 2 wires according to this picture and console should works fine.
http://diy.sickmods.net/images/pe_trace_12-15.jpg

[professor_jonny]

i have had this before and the cause was one if the chip resistors at the front where you solder the bt or ej wire for live safe chip was dammaged the pull up risistor was open circuit causing the xbox to power up as soon as it was plugged in.

[ltdanno360]

thanks guys i got it all sorted i accually seen that pic from sickmods but wasnt sure if it was legit but sure enuff
it works great i only wired in the power wire to the pic cause my eject still works just fine
thanks again for your help guys Works great..
whoo hoo let the tsop flashing commence

[manuelfigueroa2]

thanks guys i got it all sorted i accually seen that pic from sickmods but wasnt sure if it was legit but sure enuff
it works great i only wired in the power wire to the pic cause my eject still works just fine
thanks again for your help guys Works great..
whoo hoo let the tsop flashing commence

Any chance you can upload again the images of your soldering work? Not sure what to solder and don't understand the original picture. Thanks!

[gehx]

thanks guys i got it all sorted i accually seen that pic from sickmods but wasnt sure if it was legit but sure enuff
it works great i only wired in the power wire to the pic cause my eject still works just fine
thanks again for your help guys Works great..
whoo hoo let the tsop flashing commence

Any chance you can upload again the images of your soldering work? Not sure what to solder and don't understand the original picture. Thanks!

bumping this in hopes of a reply w/ the images.