Tsop flashing an atmel chip ?

Discussion about Modding the XBOX, including hardware and software hacks.
Post Reply
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Tsop flashing an atmel chip ?

Post by knottyknotty »

Hi just got hold of another box and was gonna flash the tsop ,opened case and it has a chip I've never come across before ,
Can I flash an atmel using hexens disc or do I need to change anything , I've read up on the chip an it's 256
Any help appreciated
Thxs
Jon
User avatar
spicemuseum
Posts: 906
Joined: Mon Jul 09, 2012 11:08 pm
Has thanked: 94 times
Been thanked: 75 times

Re: Tsop flashing an atmel chip ?

Post by spicemuseum »

One type of TSOP I've never personally come across. Is the box a v1.4 green Halo edition?
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Re: Tsop flashing an atmel chip ?

Post by knottyknotty »

Hi box looks standard ,man fac date 2003 10 15 , come In original box and doesn't say special edition but did come with a halo headset ,
User avatar
Rocky5
Posts: 975
Joined: Sat Feb 08, 2014 5:27 am
Has thanked: 101 times
Been thanked: 257 times

Re: Tsop flashing an atmel chip ?

Post by Rocky5 »

Use Evox to flash that Tsop, there is only one reason, you wouldn't use evox & that's if you have a Winbond.

(Evox flashes everything, bar winbond tsops, it can't erase the chip)
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod


Xbox Gamertag = Connxtion
PSN ID = JCRocky5
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Re: Tsop flashing an atmel chip ?

Post by knottyknotty »

Right tried to flash with evox 8plus returning manufacturers Id 09 device Id 00
Flash not writable
Wondering if the chips Id is in the configuration file and how do I check this and change it
Thks
User avatar
Rocky5
Posts: 975
Joined: Sat Feb 08, 2014 5:27 am
Has thanked: 101 times
Been thanked: 257 times

Re: Tsop flashing an atmel chip ?

Post by Rocky5 »

I'm assuming you bridged the points? Just re-read your post, you haven't bridged the points :-/ you need to so the Tsop can be written to.

Tsop points, this will also narrow down what xbox version you may have.
http://www.biline.ca/xbox_solder.htm

Once you have bridged the points, here is what you need to add to the ini file.

Code: Select all

Flash = 0x1f07,"Atmel AT49F002A",0x40000
Flash = 0x1f08,"Atmel AT49F002AT",0x40000
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod


Xbox Gamertag = Connxtion
PSN ID = JCRocky5
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Re: Tsop flashing an atmel chip ?

Post by knottyknotty »

Points r bridged ,it's a 1.4 board all points on top , just tried auto installer have checked evox ini file and the bios files u have listed r there ,but no good same error
User avatar
Rocky5
Posts: 975
Joined: Sat Feb 08, 2014 5:27 am
Has thanked: 101 times
Been thanked: 257 times

Re: Tsop flashing an atmel chip ?

Post by Rocky5 »

Then you may need to go the gentoox way.

If you use the hexen disc you would select the winbond option.

But before doing that make sure your solder points are solid (In good shape) & the bios is 256kbs.

Also 1.2/1.5 boards have the points on top ;) & are identical bar the version number. (Except 1.5 its has a point disconnected from the LPC)
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod


Xbox Gamertag = Connxtion
PSN ID = JCRocky5
User avatar
Xphazer
Posts: 524
Joined: Wed Jul 04, 2012 4:39 am
Location: Montréal
Has thanked: 238 times
Been thanked: 106 times

Re: Tsop flashing an atmel chip ?

Post by Xphazer »

A Winbond should still apear as writable in evox if it was wirtable /correctly bridged. (even if the flash wouldnt be succesful)
Make sure evox.ini contain all the chip flashing info in the BIOS section. http://pastebin.com/jd6FwLmx
As Rocky5 said if it's a Winbond you need to use Gentoox or EurAsia Pro Generic Flash Disc.
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Re: Tsop flashing an atmel chip ?

Post by knottyknotty »

Right aid bios flasher is giving me manufacturer es I'd 09 device id 00 flash type ,winbond w49f020t
Error reading bios file
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Re: Tsop flashing an atmel chip ?

Post by knottyknotty »

Trying hexens winbond flash
knottyknotty
Posts: 13
Joined: Wed Jan 22, 2014 1:53 pm

Re: Tsop flashing an atmel chip ?

Post by knottyknotty »

Just tried winbond on HeXEn immediately flash failed error
Checked solder points again look fine I've tsop lots of boxes before no problem first time I've come upon this chip nightmare it's staying softmodded I've had enough even though the problem solving side of me wants to keep on I've wasted a day on this
Hmmmmmmm
User avatar
Rocky5
Posts: 975
Joined: Sat Feb 08, 2014 5:27 am
Has thanked: 101 times
Been thanked: 257 times

Re: Tsop flashing an atmel chip ?

Post by Rocky5 »

That means the solder points are not functioning correctly.

Pad lifted or soldered wrong/not connected correctly.

I don't think the atmel chips is like the sharp one & requires 5v to flash.

Just try resoldering the points, 2 min job.
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod


Xbox Gamertag = Connxtion
PSN ID = JCRocky5
Slavik9916
Posts: 1
Joined: Sun Oct 02, 2022 12:24 pm

Re: Tsop flashing an atmel chip ?

Post by Slavik9916 »

Hello. i wanted to upgrade ram and did tsop xblastOS 0.56 on atmel at49f002a chip. I updated the memory, everything is fine, BUT ... bios refuses to flash from hdd and via net. When choosing a 256kb bios, he asks to press the triggers, start and the white button, after pressing it he simply goes back to the menu, and is not sewn. When flashing via net, I select the bios in the browser on the PC, the page says that I should not turn off the box, but the xbox does nothing, it just goes back to the menu. I recorded the ISO9660 standard on DVD, the image.bin file in the root of the disk, xbox writes that it cannot find it. jumpers are all worth it because tsop was made. What to do please tell me ... xbox cristal edition, chip atmel at49f002a. year of release 05.02.2004
Post Reply