Modchip Data

Discussion about Modding the XBOX, including hardware and software hacks.
User avatar
cashonly
Posts: 181
Joined: Thu Jul 19, 2012 5:12 pm
Has thanked: 20 times
Been thanked: 32 times

Re: Modchip Data

Post by cashonly » Mon May 12, 2014 6:20 pm

ok, thank you.
These pretzels are making me thirsty!

User avatar
blighty
Posts: 186
Joined: Sun Jul 22, 2012 12:56 am
Location: England
Has thanked: 25 times
Been thanked: 8 times

Re: Modchip Data

Post by blighty » Mon Jun 30, 2014 6:02 pm

swapping a bios will not corrupt your hdd, if another bios has a different hdd table then it will not be able to read your F and G drive, thats why we always say to put your bios flashing apps and bioses on E as it will be able to be read that partition no matter what and you can reflash your backup or try a different bios.

I too may have to change everything i have to F & G as it does my head in at times not being able to swap drives between certain box's

User avatar
Oldxboxusa
Posts: 145
Joined: Tue Aug 28, 2012 5:47 pm
Has thanked: 14 times
Been thanked: 3 times

Re: Modchip Data

Post by Oldxboxusa » Mon Nov 10, 2014 1:43 pm

I had seen that it is possible to solder a alladin chip with always on option (bt to gnd) but is this possible with a smartxx v3 chip?
I have solder the d0 point to smartxx without problems on a 1.6 xbox.
I don't know if it is possible on this chip.

User avatar
MrMajst3r
Posts: 218
Joined: Wed Jul 18, 2012 10:35 am
Location: Poland
Has thanked: 10 times
Been thanked: 32 times
Contact:

Re: Modchip Data

Post by MrMajst3r » Tue Nov 11, 2014 11:30 am

You can enable auto-start with your preferred bios in SmartXX OS.
Image

User avatar
Oldxboxusa
Posts: 145
Joined: Tue Aug 28, 2012 5:47 pm
Has thanked: 14 times
Been thanked: 3 times

Re: Modchip Data

Post by Oldxboxusa » Tue Nov 11, 2014 2:26 pm

MrMajst3r wrote:You can enable auto-start with your preferred bios in SmartXX OS.
But the D0 point must be soldered? or can i put them to ground?

User avatar
MrMajst3r
Posts: 218
Joined: Wed Jul 18, 2012 10:35 am
Location: Poland
Has thanked: 10 times
Been thanked: 32 times
Contact:

Re: Modchip Data

Post by MrMajst3r » Thu Nov 13, 2014 10:55 am

You have to solder D0 from motherboard to SmartXX.
Image

User avatar
Oldxboxusa
Posts: 145
Joined: Tue Aug 28, 2012 5:47 pm
Has thanked: 14 times
Been thanked: 3 times

Modchip Data

Post by Oldxboxusa » Sat Nov 22, 2014 10:17 pm

Ok I have test it. D0 to ground works with smartxx too.

User avatar
Nextelhalo
Posts: 725
Joined: Wed Jul 04, 2012 5:55 am
Location: Yoyorast Island
Has thanked: 61 times
Been thanked: 77 times

Re: Modchip Data

Post by Nextelhalo » Wed Mar 04, 2015 5:27 pm

Dont know much about it other than it doesn't work without an independent programmer. Aladdin 2

Image
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched

User avatar
cashonly
Posts: 181
Joined: Thu Jul 19, 2012 5:12 pm
Has thanked: 20 times
Been thanked: 32 times

Re: Modchip Data

Post by cashonly » Wed Sep 16, 2015 7:24 am

Here is my Xbox Modchip collection, also there are custom cables i made (a little bit offtopic, but i didnt want to open another post)
Attachments
IMG_0053.JPG
FullSizeRender.jpg
These pretzels are making me thirsty!

Viperman
Posts: 2
Joined: Wed Dec 30, 2015 2:41 am

Re: Modchip Data

Post by Viperman » Mon Jan 04, 2016 8:02 am

tacitus wrote:OzXChip, cheapmod based chip with 256k bios and jumpers for on/off and flash protect.

Here's a link to the manual: http://dwl.xbox-scene.net/~xbox/xbox-sc ... ev1.3).pdf
Hi

I bought an xbox which has this chip mod but the wire was disconnect would it be possible if someone could post this manual as the link doesn't work.

Any help would be appreciated

User avatar
Rocky5
Posts: 959
Joined: Sat Feb 08, 2014 5:27 am
Has thanked: 90 times
Been thanked: 248 times

Re: Modchip Data

Post by Rocky5 » Mon Jan 04, 2016 11:13 am

Viperman wrote:
tacitus wrote:OzXChip, cheapmod based chip with 256k bios and jumpers for on/off and flash protect.

Here's a link to the manual: http://dwl.xbox-scene.net/~xbox/xbox-sc ... ev1.3).pdf
Hi

I bought an xbox which has this chip mod but the wire was disconnect would it be possible if someone could post this manual as the link doesn't work.

Any help would be appreciated
https://web.archive.org/web/20110815085 ... ev1.3).pdf
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod


Xbox Gamertag = Connxtion
PSN ID = JCRocky5

nickbriton
Posts: 1
Joined: Thu Mar 01, 2018 11:18 am

Re: Modchip Data

Post by nickbriton » Thu Mar 01, 2018 11:19 am

cashonly wrote:
Wed Sep 16, 2015 7:24 am
Here is my Xbox Modchip collection, also there are custom cables i made (a little bit offtopic, but i didnt want to open another post)
Great collection!
I think this is exactly what I've been looking during the last year. I did check out tour.of.britain.com website. It's truly fascinating, imo.

User avatar
cashonly
Posts: 181
Joined: Thu Jul 19, 2012 5:12 pm
Has thanked: 20 times
Been thanked: 32 times

Re: Modchip Data

Post by cashonly » Tue Mar 06, 2018 12:50 pm

Thank you!
These pretzels are making me thirsty!

BaseMell
Posts: 1
Joined: Mon Feb 18, 2019 6:41 pm

Re: Modchip Data

Post by BaseMell » Mon Feb 18, 2019 6:45 pm

Hi...It's the PIC12F509, which is an evolution of the old 12C508A that is an evolution of the older 12C508.
They're all compatible to each other, except that 508A and 509 have double the program space of 508.
This is probably the reason you read "508A only", they meant the space requirement.
I burned and used some 509 in the past, no issues.

surface mount assembly

Post Reply