Page 1 of 1
flash winbond w49fo2o with Hexen
Posted: Sat Jan 05, 2013 9:56 am
by spinnersp
Just wondering if it possible,when i go to winbind flash on Hexen,it says for 1.4 and 1.5 xbox. I have v1.2.
Re: flash winbond w49fo2o with Hexen
Posted: Sat Jan 05, 2013 11:19 am
by spicemuseum
spinnersp wrote:Just wondering if it possible,when i go to winbind flash on Hexen,it says for 1.4 and 1.5 xbox. I have v1.2.
I
think I did a v1.2 Winbond TSOP, but most of them have been v1.4s, several with Winbonds, all with HeXEn.
I posted my experiences on the old forum so that the info was shared and wouldn't be lost
.
Re: flash winbond w49fo2o with Hexen
Posted: Sat Jan 05, 2013 2:41 pm
by MrMajst3r
Just run HEXEN and go to "3.3. Winbond Flash"
Re: flash winbond w49fo2o with Hexen
Posted: Sun Jan 06, 2013 12:34 am
by spinnersp
heres what i got:
boot with heXEn- choose option 3(TSOP Flashed)- pick option 3.3(Winbond Flash)- choose my BIOS 3.3.1(5003.67)- "yes" through next 3 windows,the second of which warns only for 1.4&1.5,and the third saying "Resctoox" is going to load, and use D-pad to choose "advanced". Now its not Rectoox that loads its "Gentoox" and I've tried numerous times and can not use D-pad or any other button for that matter to select/change in Gentoox, CD/Dvd is highlighted and after a quick 5secs it wants a boot disk.
Re: flash winbond w49fo2o with Hexen
Posted: Sun Jan 06, 2013 9:51 am
by MrMajst3r
You have to use original Microsoft controller. Plug it into port 1. Gentoox doesn't like third party controllers.
Re: flash winbond w49fo2o with Hexen
Posted: Sun Jan 06, 2013 2:14 pm
by spicemuseum
spinnersp wrote:heres what i got:
boot with heXEn- choose option 3(TSOP Flashed)- pick option 3.3(Winbond Flash)- choose my BIOS 3.3.1(5003.67)- "yes" through next 3 windows,the second of which warns only for 1.4&1.5,and the third saying "Resctoox" is going to load, and use D-pad to choose "advanced". Now its not Rectoox that loads its "Gentoox" and I've tried numerous times and can not use D-pad or any other button for that matter to select/change in Gentoox, CD/Dvd is highlighted and after a quick 5secs it wants a boot disk.
From memory it's normal that it boots Gentoox. I think the instructions immediately preceeding it loading tell you to select an option (think it's "HDD") before the 5 second default timeout.
Re: flash winbond w49fo2o with Hexen
Posted: Mon Jan 07, 2013 1:23 am
by spinnersp
MrMajst3r wrote:You have to use original Microsoft controller. Plug it into port 1. Gentoox doesn't like third party controllers.
Thank you this was the problem, only now I get flash failed! Guess I'll have to check solder points.
Re: flash winbond w49fo2o with Hexen
Posted: Mon Jan 07, 2013 5:40 am
by spinnersp
Yep,fixed solder points,all went good! Thanks again for the help!