Page 1 of 1
TSOP switch for split BIOS
Posted: Thu Jan 18, 2018 1:30 am
by Marty
Is it possible to do the TSOP splitting switch mod on a Ver 1.0 that's already been flashed with the Xecuter2 5035 BIOS?
Could the switch be wired on, then you'd re-flash?
Re: TSOP switch for split BIOS
Posted: Thu Jan 18, 2018 5:11 am
by toxicmedz
The switch can be wired on, It would still work on both banks too. 5035 is a 512mb bios so its just doubled. Both banks would be the same bios, you could reflash each separately after the modification.
Re: TSOP switch for split BIOS
Posted: Sat Jan 20, 2018 5:10 am
by Marty
Okay...thank you. Need to do a few case repairs, then I'll try this and let you all know how it went.
Re: TSOP switch for split BIOS
Posted: Sun Feb 04, 2018 3:54 am
by Marty
It's been suggested to cut the trace to A18/A19 after wiring up the switch...Is this necessary, or merely a suggestion? Any guides to this procedure?
Re: TSOP switch for split BIOS
Posted: Fri Mar 02, 2018 9:46 pm
by Sieger179
Use the x2 bios manager to create a custom bios for the full 1mb
https://www.dropbox.com/s/e3urdnjkb4cfs ... 3.rar?dl=0
Re: TSOP switch for split BIOS
Posted: Fri Mar 02, 2018 9:54 pm
by Sieger179
There's no need to cut anything to split the tsop
