XBMC4Xbox

Hi! I am installing the aladdin xt plus 2 chip in my xbox and want to know if the process is right for the xbox v1.0 as I don't have an actually guide to follow and taking notes from anything I can find.

step 1. take spare pin out of the pin header then solder to lpc port.

step 2. r3g3 right side solder wire from and to bt , Now I have seen what looks like an alternative way for this and I will leave the picture to confirm that this is ok , it solders from the bt to the aladdin chip ground let me know if this is ok please? .

Step3. solder wire to D0 on xbox board to D0 on aladdin chip

Now I think that’s all there is I know it can be different for different xbox version I have also seen wire from the LT to the mother board not sure if that is need. What do you guys think? am I missing anything!
http://i1334.photobucket.com/albums/w64 ... a6sdq9.png

Thats all there is to it, for all versions up to 1.5.
ENJOY!

RunsilenT wrote:Thats all there is to it, for all versions up to 1.5.
ENJOY!

Hi! I want to upgrade the Hdd do you know if I can just plug a new one in or will I have to clone the original hdd?

Only a softmodded drive requires cloning.

http://www.xbmc4xbox.org.uk/forum/viewt ... f=14&t=649

There are lots of tutorials on youtube etc for replacing the xbox hard drive

RunsilenT wrote:Only a softmodded drive requires cloning.

http://www.xbmc4xbox.org.uk/forum/viewt ... f=14&t=649

There are lots of tutorials on youtube etc for replacing the xbox hard drive

Hi! do you know how I can access the bios of the aladdin xt chip? I still have the original hdd and the xbox dash I just want to test the bios ,

Any of the install discs have bios abilit such as Slayers, HEXen etc.