Page 1 of 1

Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 2:16 pm
by roadster
Just updated to 3.2 stable (clean install) and the Pictures slideshow is really slow to start and really slow to change pictures, as in longer than the 3 seconds I specified. The pictures dont rotate using the exif information.

All works fine on 3.1 r31107 which I have been using before.

Any ideas?

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 2:37 pm
by BuZz

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 2:43 pm
by roadster
OK, thanks.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 2:46 pm
by BuZz
the speed issue is not known though. slideshow is fast here, and a lot faster than it used to be.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 3:01 pm
by roadster
Nope, definately slower by a considerable amount between the two builds. I have just checked it again on 3.1 the first pic comes on the screen after 2 secs approx and the slideshow changes at 3 second intervals as set up to do. On 3.2 it takes about 8 seconds to start up then advances at 5 - 6 second intervals on the same 3 second setting. All other settings are the same.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 3:19 pm
by BuZz
then you need to post a debug log. see the sticky topic.

in this case a debug log from both versions would be useful for a comparison.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 4:08 pm
by roadster
http://pastebin.com/PmTyUWd1 is 3.1

http://pastebin.com/9Hydi1Up is 3.2

Have I done that right?? All new to me!

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 4:10 pm
by BuZz
need to enable debugging in settings and post the log after running the slideshow.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 4:35 pm
by roadster
Try again.........

http://pastebin.com/18KCMdED is 3.1

http://pastebin.com/Pd5YGqjV is 3.2

I'm guessing that its something I haven't set correctly :oops:

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 4:46 pm
by BuZz
It seems as though its not loading them as quickly from the samba share. can you copy to the local hd and test, to rule out the image code.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 5:28 pm
by roadster
http://pastebin.com/3CvrtcXb

Pictures are displayed correctly from a local source.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 5:39 pm
by BuZz
must be something related to samba / networking - but im not sure what - are your settings equivalent ? have you tried installing the new version on its own ?

I can't reproduce the issue here.

Re: Pictures not rotating using exif info on 3.2 stable

Posted: Thu Aug 30, 2012 6:13 pm
by roadster
I'll check everything and report back. "Someone" will want the TV soon though..........