Page 5 of 6
Re: 80mm Silent Fan Mod
Posted: Wed Mar 18, 2015 2:20 am
by fxmech
The 15mm design is not going to move enough air (unless they move very fast? In that case it will be as noisy as the stock fan.)
Will a 70x70x25 work without excessive cutting? The wider blade will push more air at less RPM, quieter.
I am tempted to try one out l. I want to avoid ordering a whole bunch of them if I have to cut anything on the case. Ideally, there's a 70x25 fan that fits in the Xbox without having to modify anything but the fan itself
Re: 80mm Silent Fan Mod
Posted: Wed Mar 18, 2015 6:49 pm
by Munch
but why isn't my fan controller not responding in changing the Volts?! how much Volts is the 100% setting in XMBC or the 5x speed in the unleashed menu?!
Re: 80mm Silent Fan Mod
Posted: Fri Mar 20, 2015 12:44 am
by fxmech
6v maximum
Re: 80mm Silent Fan Mod
Posted: Sat Mar 21, 2015 5:55 pm
by Munch
wtf only 6v? how do you get the fan spinning much more then?
Re: 80mm Silent Fan Mod
Posted: Sat Mar 21, 2015 11:23 pm
by Munch
whufclee wrote:
Step 4:
Now tidy up the rough edges and bend the metal outwards slightly (so the fan doesn't clip it otherwise it will make a very annoying noise!).
nice guide dude. I gonna put a 80mm fan inside. got one here for testing and it was really a pain. Why did you just bend the metal outwards? I don't think you need that metal holder on the top of the grill anymore? I just cut it!
Re: 80mm Silent Fan Mod
Posted: Mon May 04, 2015 7:34 am
by XC-3730C
What are good CPU and GPU fans with blue LED's?
Re: 80mm Silent Fan Mod
Posted: Wed Jul 22, 2015 4:15 pm
by Nextelhalo
These used to be the best when they were still available. Wish I had a few laying around. If you find one make sure it's the PRO or else it's alittle too small and the screw holes will not line up with the motherboard.
http://www.vantecusa.com/en/product/view_detail/96
Re: 80mm Silent Fan Mod
Posted: Tue Jul 05, 2016 12:09 pm
by scroeffie
i did the 80mm fan mod iam not happy with the temps they are above 50gpu and cpu sometimes 62 celcius
i have a 1ghz 128mb xbox with artic silver 5 any tips to improve /the fan iam using is a cheap chinese one
Re: 80mm Silent Fan Mod
Posted: Tue Jul 05, 2016 12:21 pm
by Geeba
I've got one of these in my 1Ghz xbox... still really quiet on 100%
http://www.bequiet.com/en/casefans/324
Re: 80mm Silent Fan Mod
Posted: Wed Jul 06, 2016 7:26 pm
by scroeffie
i installed a noctua fan realy happy with it ! temps are perfect way better than the chines 1 euro fan
question is there a way to keep the fan running at 100% in game
Re: 80mm Silent Fan Mod
Posted: Wed Jul 06, 2016 7:38 pm
by XC-3730C
scroeffie wrote:i installed a noctua fan realy happy with it ! temps are perfect way better than the chines 1 euro fan
question is there a way to keep the fan running at 100% in game
I think you would need a fan that can be manually adjusted for that.
Re: 80mm Silent Fan Mod
Posted: Wed Jul 06, 2016 7:54 pm
by scroeffie
XC-3730C wrote:scroeffie wrote:i installed a noctua fan realy happy with it ! temps are perfect way better than the chines 1 euro fan
question is there a way to keep the fan running at 100% in game
I think you would need a fan that can be manually adjusted for that.
makes sense
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 1:43 am
by Rocky5
scroeffie wrote:i installed a noctua fan realy happy with it ! temps are perfect way better than the chines 1 euro fan
question is there a way to keep the fan running at 100% in game
If softmodded check your softmod settings menu (usually comes with the save)
(Example is NKPatcher Settings, this is what mine is called in my 2016 softmod)
If chipped or TSOPPED, you need to change the fan speed in the bios & reflash it.
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 2:53 am
by XC-3730C
How do you change the fan speed in the BIOS? Can you then adjust the speed afterwards?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 3:45 am
by Rocky5
XC-3730C wrote:How do you change the fan speed in the BIOS? Can you then adjust the speed afterwards?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Depending on what bios you used, it could be a simple as editing a file on your Xbox HDD or using a application on your PC to change it.
M8 bios example.
http://www.xbmc4xbox.org.uk/forum/viewt ... 563#p32588
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 11:30 am
by scroeffie
i have a indi 5003 bios ,so what you are saying when you play a game the fan wil run at 100%
doesnt the game overited the bios settings ?
is this the tool for the indi bios IND-Bios_Config_App < i have it ,but i dont know if it wil brick my 1ghz tsop xbox ?
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 12:11 pm
by Rocky5
scroeffie wrote:i have a indi 5003 bios ,so what you are saying when you play a game the fan wil run at 100%
doesnt the game overited the bios settings ?
is this the tool for the indi bios IND-Bios_Config_App < i have it ,but i dont know if it wil brick my 1ghz tsop xbox ?
Just edit your C:\ind-bios.cfg with a text editor & add fanspeed=50 for 100%
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 12:22 pm
by scroeffie
are you shure its on C: i cant find it n64 freak made and flashed my xbox with indi 5003 it says at the start up
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 6:46 pm
by Rocky5
scroeffie wrote:are you shure its on C: i cant find it n64 freak made and flashed my xbox with indi 5003 it says at the start up
do you get a white X logo screen, with a low rez ind-bios logo?
if you do your running the internal config, you will need to add one to C:\
Here is mine, with the fan speed set to 100%, just change the boot paths to what you need.
(I use 15 with my noctua fan, but that's on a default CPU)
Code: Select all
480P=1
RESETONEJECT=0
USEUSEALLMEMORY=1
IGRMODE=2
IGRLOADSDASH=1
AVCHECK=0
NOSOUND=1
IFILTER=1
FANSPEED=50
DISABLEDM=1
LEDPattern=OOOO
AUTOLOADDVD=1
CUSTOMBLOB=0
INTRO=0
SHOWFLUB=0
FOGON=0
XLOGOSCALE=100
TEXTSCALE=100
XLIGHTCOLOR=0xFF0000FF
SKEWEN=1
YSKEWLOGO=-20
XSKEWLOGO=0
YSKEWXLOGO=-19
XSKEWXLOGO=0
YSKEWTEXT=15
XSKEWTEXT=0
XINNERCOLOR=0x74BE10
XBOXCOLOR=0x74BE10
BGCOLOR=0x000000
TMS=0
NOLIGHTEN=1
IND3D=0
SHOWXEN=1
SHOWMSEN=0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
CUSTOMBLOB=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\flubber.x
CUSTOMLOGO=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\mslogo.bmp
CUSTOMX=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\xlogo.x
CUSTOMTEXT=\Device\Harddisk0\Partition2\Ind-Bios\Custom-Boot-Logos\text.x
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Test Paths
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;CUSTOMBLOB=\Device\Harddisk0\Partition2\Ind-Bios\Test\flubber.x
;CUSTOMLOGO=\Device\Harddisk0\Partition2\Ind-Bios\Test\mslogo.bmp
;CUSTOMX=\Device\Harddisk0\Partition2\Ind-Bios\Test\xlogo.x
;CUSTOMTEXT=\Device\Harddisk0\Partition2\Ind-Bios\Test\text.x
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
DEFAULTXBE=\Device\CDrom0\Default.xbe
DASH1=\Device\Harddisk0\Partition2\evoxdash.xbe
DASH2=\Device\Harddisk0\Partition2\xboxdash.xbe
DASH3=\Device\Harddisk0\Partition1\TDATA\RescueDash\default.xbe
Re: 80mm Silent Fan Mod
Posted: Thu Jul 07, 2016 7:06 pm
by scroeffie
how do i do this i just use your settings and put it in a word doc ?
loading indi bios is white / the flubber animation lookes normal / than i see the background is all white the x logo is green ind bios text is green