XBMC4Xbox

Posted: **Thu Aug 23, 2012 9:13 am**

I found the instructions for the Akira modchip on the net, and it includes the solder points

If anybody wants them let me know

Posted: **Thu Oct 25, 2012 12:33 pm**

professor_jonny wrote:
nidge wrote:"Akira v2" modchip, this starts with a blue X logo, no flubber animation, and boots straight to XBMC4XBOX 3.0, which also says bios type "unknown" in the System info screen. I don`t think its flashable, but I might be wrong? So could I swap the chips over... Both Xboxes are v1.4, both have large HD`s, X3 120gb and Akira v2 160gb.

you have to flash it with the akira flash bios but to load this bios you need to use pheonix bios loader.
i have one of these chips also, they are a pain to update.

Just flashed the Akira modchip with X2 bios using Hexen disc

Posted: **Thu Dec 27, 2012 11:07 am**

I've experienced the exact same symptoms you were having with my X3 machine, choppy graphics and no x3 config it was usually if the chip was not sitting straight on the pinheader or the D0 wire was loose, Your old mobo might still be fine it could be worth it to use as a softmodded machie, doesnt hurt to try

Posted: **Sun Dec 30, 2012 1:37 pm**

Hi Kozz, I'm planing on trying out all the Xboxes I have piled up in the corner, so fingers crossed

XBMC4Xbox

Xecutor 3

Re: Xecutor 3

Re: Xecutor 3

Re: Xecutor 3

Re: Xecutor 3