hey my xbox stopt working when i was playing coinops
when i tried to boot it i got a flashing red and green light no sound or video ,when i took the power off i now have a solid green light
but it wont show anything on the tv !
so far what i tried changed the sata to ide connector
tried composit cable and a new component cable
tried a ide hdd same thing wont boot or show anything
its a 1ghz 128mb xbox than i bought last year from N64FREAK
xbox is a tsop with indi bios that he did
i also tried a difrent sata to ide same thing i can hear the hdd spinning but nothing happens
oh and the dvd drive wont open ! wierd ,its not sticky i have cleaned it inside and outside rubber beld etc
UPDATE : oke its working again but not stable found the problem these sata to ide adapters are not stable or reliable at all !!
xbox dead ?
Re: xbox dead ?
80 wire IDE.
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
Re: xbox dead ?
yess i have a 80 wire ide cable !
xbox works perfect for now !! the problem is the sata to ide adapter the connection is also not strong !
in time it wil come off again it happend before to nothing new
UPDATE : problem came back when i rebooted the xbox its frozen now at boot at the blob logo !!
second boot ! its working now booted fine iam shure its the sata to ide they are just not stable or reliable
xbox is not overheating temps are stable at 30c thermal paste is artic silver 5
playing coinops sound just stopt working ?!!
after reboot sound is working again wierd just wierd
xbox is freezing when ftping
after rebooting i get a lime green xbox ! indi bios kernal panic !
error 13 dashb could not be launched
dvd drive keeps making noise like its trying to read a disc
xbox works perfect for now !! the problem is the sata to ide adapter the connection is also not strong !
in time it wil come off again it happend before to nothing new
UPDATE : problem came back when i rebooted the xbox its frozen now at boot at the blob logo !!
second boot ! its working now booted fine iam shure its the sata to ide they are just not stable or reliable
xbox is not overheating temps are stable at 30c thermal paste is artic silver 5
playing coinops sound just stopt working ?!!
after reboot sound is working again wierd just wierd
xbox is freezing when ftping
after rebooting i get a lime green xbox ! indi bios kernal panic !
error 13 dashb could not be launched
dvd drive keeps making noise like its trying to read a disc
Re: xbox dead ?
The last few lines made it clear that it is indeed your adaptor, those are issues you get if using a 40 wire IDE cable with a lot of adaptors & usually the 80 wire fixes these issues.
I have a few adaptors that all work perfectly on the Xbox with no issues. When using a 80 wire IDE cable that is.
So maybe it's time to buy one that is known to work 100%?
I have a few adaptors that all work perfectly on the Xbox with no issues. When using a 80 wire IDE cable that is.
So maybe it's time to buy one that is known to work 100%?
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
Re: xbox dead ?
i bought this one today / http://www.ebay.nl/itm/142065107591?_tr ... EBIDX%3AIT
http://www.ebay.nl/itm/0-75m-ATA133-80p ... SwU9xURWaT << this is the cable iam using at the moment
adapters tried allot of kinds they al are not stable at the beginning they are !
tried this one http://www.ebay.nl/itm/Brand-New-PATA-I ... SwQJhUj~3U
also tried the ones with caps with out caps with faster cristal etc etc with jumper select without
the problem also is the connector over time gets loos its not a tight fit !! the ide and power cable is pushing out the sata part
and over time this happens of course iam not moving my console 24/7 but i have to clean my tv cab once in a while ,and than inside the connection is getting loose or bad
tried securing the connection with hot glue ,with tape,with zipties etc etc
also these adapters have all the same jmicron brand or chip !!
i want to trie the kingwin but its expensive http://www.ebay.nl/itm/Kingwin-SATA-Dev ... xyI8lR908x
http://www.ebay.nl/itm/0-75m-ATA133-80p ... SwU9xURWaT << this is the cable iam using at the moment
adapters tried allot of kinds they al are not stable at the beginning they are !
tried this one http://www.ebay.nl/itm/Brand-New-PATA-I ... SwQJhUj~3U
also tried the ones with caps with out caps with faster cristal etc etc with jumper select without
the problem also is the connector over time gets loos its not a tight fit !! the ide and power cable is pushing out the sata part
and over time this happens of course iam not moving my console 24/7 but i have to clean my tv cab once in a while ,and than inside the connection is getting loose or bad
tried securing the connection with hot glue ,with tape,with zipties etc etc
also these adapters have all the same jmicron brand or chip !!
i want to trie the kingwin but its expensive http://www.ebay.nl/itm/Kingwin-SATA-Dev ... xyI8lR908x
Re: xbox dead ?
You must have jumpers of the adaptor, to the blue one right off the bat is a no go. As for the green one I haven't a clue never used that one.
Here is the one I use ( must look like the image ) and it works 100%, also it's cheap.
http://m.ebay.nl/itm/IDE-to-Serial-ATA- ... nav=SEARCH
I also use a Startech one but that is expensive.
Here is the one I use ( must look like the image ) and it works 100%, also it's cheap.
http://m.ebay.nl/itm/IDE-to-Serial-ATA- ... nav=SEARCH
I also use a Startech one but that is expensive.
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5