Logitech Wireless precision Controller
Logitech Wireless precision Controller
Hi there, my Logitech Wireless precision Controller is now stopped working, the receiver sits there flashing away. Have replaced batteries no buttons work, only the vibration button, pressed connect on receiver nothing anyone come across this problem could give me some help thanks
- Nextelhalo
- Posts: 725
- Joined: Wed Jul 04, 2012 5:55 am
- Location: Yoyorast Island
- Has thanked: 61 times
- Been thanked: 77 times
Re: Logitech Wireless precision Controller
Hit the button on the receiver and then hit the white button on the controller to see if it sync's up. That's the only way i've been able to get them back and working. Also make sure another controller (Logitech Precision) is not trying to compete with the signal, if so then do the above method on both controllers.
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
Re: Logitech Wireless precision Controller
Thanks Nextelhalo didn't work either the little red light on the controller should blink every time you hit a button and its not doing that so possible fault inside controller? but vibration button works
- Nextelhalo
- Posts: 725
- Joined: Wed Jul 04, 2012 5:55 am
- Location: Yoyorast Island
- Has thanked: 61 times
- Been thanked: 77 times
Re: Logitech Wireless precision Controller
Possibly so but not common from my experience. Pop the controller open and see what it looks like.
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
Re: Logitech Wireless precision Controller
Hi there just an update pulled controller apart every thing looks mint couldn't see any dry solder joints cleaned with cotton bud and meths put it back together still no go think it may be a chuck out.
- GoTeamScotch
- Posts: 268
- Joined: Sat Apr 06, 2013 2:17 am
- Has thanked: 97 times
- Been thanked: 75 times
Re: Logitech Wireless precision Controller
Sorry to bump an old thread but if anyone is finding this page through google or searching the forums, you might try this:
When my logitech controller started doing this, I noticed that I could unplug my memory unit and plug it back in and then it would connect to my controller. This worked every time. I'm not sure why it did but I always just kept a memory unit in the receiver for this reason after a certain point. It's not a fix per-say, but I've been doing it this way for years now.
When my logitech controller started doing this, I noticed that I could unplug my memory unit and plug it back in and then it would connect to my controller. This worked every time. I'm not sure why it did but I always just kept a memory unit in the receiver for this reason after a certain point. It's not a fix per-say, but I've been doing it this way for years now.
Remember kids, always zero-ize your HDD key!
-
- Posts: 1
- Joined: Sun Aug 19, 2018 10:44 pm
Re: Logitech Wireless precision Controller
Did you ever figure out the solution to this other than plugging in a memory card? I bought a Logitech Wireless controller and have the same issue. The red light on the controller stops blinking, making it seem like it's paired, but the receiver continues blinking. Only the vibrate button works; pressing any other buttons produces no input on the Xbox.GoTeamScotch wrote: ↑Wed Apr 06, 2016 11:21 pm Sorry to bump an old thread but if anyone is finding this page through google or searching the forums, you might try this:
When my logitech controller started doing this, I noticed that I could unplug my memory unit and plug it back in and then it would connect to my controller. This worked every time. I'm not sure why it did but I always just kept a memory unit in the receiver for this reason after a certain point. It's not a fix per-say, but I've been doing it this way for years now.
Some of the things I've tried so far:
-Taking it apart and cleaning all the contacts
-Checking the solder joints, I've attached an imgur link below of the board
-L + Start to re-calibrate the controller
-Connect on the receiver + white button to pair the two
-Attempting to pair to other receivers
https://imgur.com/a/xxhqNfG
The controller is in physically good shape all-around. I'm completely perplexed as to why it won't work.