Hey,
I have just installed XBMC 3.3 through a Softmod One Click Install on my old Xbox, but when booting it always says XBMC Fatal Error
error loading keymaps from special://xbmc/system/keymap.xml. Does anybode know how to fix this?
Thanks in advance
XtremeRafi
Fatal Error on startup after install
-
- Posts: 4
- Joined: Sat Oct 05, 2013 12:34 pm
- Has thanked: 3 times
- Dan Dar3
- Posts: 1176
- Joined: Sun Jul 08, 2012 4:09 pm
- Has thanked: 273 times
- Been thanked: 257 times
- Contact:
Re: Fatal Error on startup after install
Use Error Recovery mode to look at Q:\system\keymap.xml and replace it if needed.
http://www.xbmc4xbox.org.uk/wiki/Error_Recovery_Mode
http://www.xbmc4xbox.org.uk/wiki/Error_Recovery_Mode
- App(s): XBMC4Xbox Remote for Android | Plugin(s): XBMC4Xbox Installer
- Please donate to XBMC4Xbox project to keep it going, every little helps!
- Join us on TeamSpeak
-
- Posts: 4
- Joined: Sat Oct 05, 2013 12:34 pm
- Has thanked: 3 times
Re: Fatal Error on startup after install
But what could have gone wrong while installing?
I can't get into Error Recovery Mode either. it justs says "key code detected for Error Recovery Mode" than it says IP and port and press any button to reboot.
I can't get into Error Recovery Mode either. it justs says "key code detected for Error Recovery Mode" than it says IP and port and press any button to reboot.
-
- Posts: 922
- Joined: Tue Jul 17, 2012 5:42 pm
- Location: Essex, UK
- Has thanked: 18 times
- Been thanked: 109 times
- Contact:
Re: Fatal Error on startup after install
That is recovery mode, it gives you the opportunity to ftp into the xbox and fix any errors. If you do as Dan suggests and copy the file over to replace your existing one in your userdata folder it should fix your problem. As for what went wrong I really don't know, sounds as though you may have a corrupt keymap file? What softmod installer disc are you using?
-
- Posts: 4
- Joined: Sat Oct 05, 2013 12:34 pm
- Has thanked: 3 times
Re: Fatal Error on startup after install
I've apparently fixed the keymap error now. But now i can't figure out how to solves this error : "No suitable skin version found We require at least version 2.1000" I've put a recent PRoject Mayhem in both E and Q skin folder, but the error keeps appearing.whufclee wrote:That is recovery mode, it gives you the opportunity to ftp into the xbox and fix any errors. If you do as Dan suggests and copy the file over to replace your existing one in your userdata folder it should fix your problem. As for what went wrong I really don't know, sounds as though you may have a corrupt keymap file? What softmod installer disc are you using?
I'm sorry for asking so much, but I'm new to this whole thing.
Re: Fatal Error on startup after install
Hold down both thumbsticks (clicked) when launching or booting XBMC. This will cause a screen to pop up asking you if you want to reset your settings (including the active skin) to the system defaults. c/p from the wiki
-
- Posts: 4
- Joined: Sat Oct 05, 2013 12:34 pm
- Has thanked: 3 times
Re: Fatal Error on startup after install
That works, I guess I should have checked the wiki before asking.spinnersp wrote:Hold down both thumbsticks (clicked) when launching or booting XBMC. This will cause a screen to pop up asking you if you want to reset your settings (including the active skin) to the system defaults. c/p from the wiki
Thanks everybody for the quick help!
Re: Fatal Error on startup after install
I would like to start off by profusely apologizing for being a necromancer.
Secondly, I just got this error. I FTP'd into the xbox and discovered that the system folder in XBMC had no contents, and I cannot transfer files into the xbox without it hiccuping for ages and eventually just disconnecting.
Has my box died?
Edit: Got a backup copy working. Buuuut my F:/ drive is gone. What do I do?
Secondly, I just got this error. I FTP'd into the xbox and discovered that the system folder in XBMC had no contents, and I cannot transfer files into the xbox without it hiccuping for ages and eventually just disconnecting.
Has my box died?
Edit: Got a backup copy working. Buuuut my F:/ drive is gone. What do I do?