Buffering from local NAS

If you need any help with XBMC4XBOX, such as installing or using the software, please post it in here.
Post Reply
surlyduff11
Posts: 6
Joined: Sat May 11, 2013 1:44 am

Buffering from local NAS

Post by surlyduff11 »

http://pastebin.com/YnDxFcE5

I've started having buffering issues over the past few weeks when playing content from a local NAS. I've changed a few things on my network so I'm not quite sure where to start. I use 3 different NAS drives and they all have varying levels of the same issue. The attached log shows it at it's worst. I have another xbox that has the same issues but for some reason I can't ftp to it to get the log.

My Network:
Netgear FVS336g router feeds to a Cisco SG100d-08 gigabit switch
NAS' are connected to this switch at GB/Full duplex
Gigabit switch feeds a Cisco SF100d-16 10/100 switch.
Xbox's are connected to 10/100 switch at 100/full duplex

I suspect the problem lies in my network setup as I've had both xbox's and NAS' running on other network setups with minimal issues. I know cascading switches is frowned upon but the router is in another part of the house and there's only one cable between the router and switches.
User avatar
Dan Dar3
Posts: 1176
Joined: Sun Jul 08, 2012 4:09 pm
Has thanked: 273 times
Been thanked: 257 times
Contact:

Re: Buffering from local NAS

Post by Dan Dar3 »

You seem to be using a build from July:

Code: Select all

15:51:38 M: 56741888  NOTICE: Starting XBMC4Xbox.  Built on Jul 21 2013 (SVN:31796, compiler 1310)
have you considered updating to 3.3.3?
http://www.xbmc4xbox.org.uk/2013/10/xbm ... -released/
Post Reply