guide modchip

[scroeffie]

can some one help me want to install a aladin modchip on a xbox
but cant find a step by step guide just some not clear pitures its my first time
i need a guide thanks

[Rocky5]

Quick google search.

Also you don't need to connect the L1 or BT points to the mother board, as these were used to disable enable the modchip & change the led colour when enabled.

Just connect the BT point on the modchip to a ground pad on the modchip, to enable the modchip all the time.

[RunsilenT]

Found some 1.6 install Pics that may help. I don`t know how hard
it is to find pcb`s but the wire install here looks clear enough.
Goodluck!

[scroeffie]

so i installed the pin thing and connect bt to ground on the chip put the chip on the pins
start xbox nothing happens ? what is do point ?

[Rocky5]

so i installed the pin thing and connect bt to ground on the chip put the chip on the pins
start xbox nothing happens ? what is do point ?

You have to connect the D0 point, that tells the Xbox to boot from the LPC bus.

(You only need to ground the D0 point since you won't be booting the retail bios as its not needed.)

http://www.xbox-scene.com/articles/preparing-d0.php

[scroeffie]

so do point to ground thats it ? i wil trie tommorow thanks for the help
doesnt work xbox does nothing ? what do i do next i soldert a wire to do point where does the wire go ? on the chip ?
is there a difrents how to put the chip on the pins ?

[scroeffie]

i installed the chip xbox boots up chip is red but than error code 06

see link
https://www.facebook.com/photo.php?fbid ... =1&theater

[MrMajst3r]

Error code 06 means that hard drive is locked with different key than saved on motherboard. It seems this hard drive comes from another Xbox. Have you swapped HDDs between consoles?

[scroeffie]

the xbox was firtst softmodded i lost the softmod than i wanted to trie and install the chip than i god error 06

[Rocky5]

Like MrMajst3r said, error 06 is the HDD cant be unlocked.

So you're using the wrong Hdd for that Xbox motherboard.

[scroeffie]

Like MrMajst3r said, error 06 is the HDD cant be locked.

So you're using the wrong Hdd for that Xbox motherboard.

i dont know i came with this hdd its not stock it was first softmodded
i would not matter with chip ?

[Rocky5]

The chip has nothing to do with the eeprom, its a small chip above your TSOP. (Yours is a Winbond TSOP) it holds keys & settings for your xbox.

[scroeffie]

oke so what do i do because i dont have the original miscrosoft hdd

[Rocky5]

Buy a new hdd & format it on the Xbox, now that you have a chip you don't need to lock it.

Or if the hdd you have in front of you is not a stock hdd, see if you can unlock the drive via XBHDM.
(It may have had a master password set.)

Or if all else fails read here.
https://ipv5.wordpress.com/2008/04/14/l ... passwords/

[scroeffie]

oke thanks for the help wil try tomorrow

[scroeffie]

is it possible to unlock a hardrive with a x3 xbox because i have one and the x3 has a special menu

[professor_jonny]

is it possible to unlock a hardrive with a x3 xbox because i have one and the x3 has a special menu

yes and no,
if you have the hdd lock code yes if not no with some exceptions.

if you originally unlocked it or using some specific tools it sets a master password to unlock it if you lost the user password.

psyko_chewbacca's xblast os has the ability to try to unlock your hdd by the back up passwords commonly used in these programs
see here:
http://www.assemblergames.com/forums/sh ... S-v0-2Beta

it is worth a try you may be able to unlock it ?

[RataXes]

Hello,

just found DuoX2 GS (blue) from old stuff. Obviously I had to buy second hand xbox, but I can't find any guide for how to install GS. I can find for normal DuoX2 and guide always says it applies for every version of DuoX2, but.. no it doesn't. GS has some kind of extra circuit board which is never covered in guides. Is there any good guide for specifically DuoX2 GS?

Edit: Circuit board says "1.6" so is it only for Xbox version 1.6? Installation would be just to solder pin header to mobo, chip to pin header and wire to d0? AND to remove extra pins, like in this diagram http://www.knightdiscounts.com/VideoGames/modchi153.jpg pins between H and I?