I have come across a load of xboxs and a few of them were chipped, Ive only ever had a softmoded console and my knowledge about chips and flashing them is very little. Basically I have two xbox as in the attached picture, both hasve the same chip installed but one of them has a a small switch controll panel at the front and the other one is missing. The machine with the controll panel (only 40gb) does boot up but the other one does not, ( but will when I attached a switch control panel).
Are there places where I can get one of these pieces or is there a mod or alternative way of boot the machine to read the chip.
unknown chip not booting
- professor_jonny
- Posts: 1296
- Joined: Thu Jul 05, 2012 5:41 am
- Location: New Zealand
- Has thanked: 66 times
- Been thanked: 196 times
Re: unknown chip not booting
that is an xecuter 2.6 modchip
you could try to hard wire it to boot a bank below is the info I believe on the functions of the pins of the bank switch.
Pins 1 & 4 - On if bank switch is set to 1, off if set to 2.
Pins 2 & 4 - On if chip is enabled, off if disabled.
Pins 3 & 4 - On if flash is protected, off if unprotected.
Pins 5 & 6 - On if chip is enabled, off if disabled.
you could try to hard wire it to boot a bank below is the info I believe on the functions of the pins of the bank switch.
Pins 1 & 4 - On if bank switch is set to 1, off if set to 2.
Pins 2 & 4 - On if chip is enabled, off if disabled.
Pins 3 & 4 - On if flash is protected, off if unprotected.
Pins 5 & 6 - On if chip is enabled, off if disabled.
Re: unknown chip not booting
Thanks for the clarification!
It was a striking victory for me! No doubt in it! It seems I need a new place to live now. Maybe even a new family. All to find betway just here. That website made me a free man.