I have my first Winbond chip I'm trying to flash. It's a v1.4. I'm using Hexen 2017 disc. I try the selection for winbond and it loads to Gentoox, however, the screen is messed up. It's grayed and looks like there is some kind of video problem. No controls respond like it's frozen (I'm using a OEM microsoft controller).
I used BiOS checker and my solder points are good. Any ideas why it would fail? It does so no matter which of the winbond bios I choose.
TSOP V1.4 Winbond Gentoox Fails with Gray Screen
- Nextelhalo
- Posts: 725
- Joined: Wed Jul 04, 2012 5:55 am
- Location: Yoyorast Island
- Has thanked: 61 times
- Been thanked: 77 times
Re: TSOP V1.4 Winbond Gentoox Fails with Gray Screen
Havent used Hexen for a Winbond but you can always use the Raincoat flasher.
See if this helps get you going.
viewtopic.php?f=13&t=3738
See if this helps get you going.
viewtopic.php?f=13&t=3738
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
Re: TSOP V1.4 Winbond Gentoox Fails with Gray Screen
Thanks for the advice, but I did get it to work with Hexen.
I prefer Hexen b/c it's mostly stupid-proof
Solution: I was using a third party video cable with S-Video connected. I switched over to an original xbox and plugged in the RCA and BOOM, all is well. Just some sort of video output problem with the svideo I guess.
Hope this helps someone down the road!
I prefer Hexen b/c it's mostly stupid-proof
Solution: I was using a third party video cable with S-Video connected. I switched over to an original xbox and plugged in the RCA and BOOM, all is well. Just some sort of video output problem with the svideo I guess.
Hope this helps someone down the road!
-
- Posts: 213
- Joined: Fri Oct 05, 2012 5:19 pm
- Location: Québec, Canada
- Has thanked: 21 times
- Been thanked: 125 times
Re: TSOP V1.4 Winbond Gentoox Fails with Gray Screen
Glad you got it working. If you don't mind experimenting a bit, I'd like if you could try to launch XBlast OS Xbe version with that third party video cable. See if you have the same issue as with Gentoox Loader.
Use the latest version : https://bitbucket.org/psyko_chewbacca/ ... downloads/
Use the latest version : https://bitbucket.org/psyko_chewbacca/ ... downloads/