Ludvigs Xboxes, WIP and finished results (until next mod :p)
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Ludvigs Xboxes, WIP and finished results (until next mod :p)
Figured I would make a post, and show my Xboxes and modding I do to them.
Starting off with a 1.1, it is in for a major overhaul.
Started off today with removing it from the case and starting with cleaning, changing the thermal compound on both CPU and GPU.
Sent fra min NX551J via Tapatalk
Starting off with a 1.1, it is in for a major overhaul.
Started off today with removing it from the case and starting with cleaning, changing the thermal compound on both CPU and GPU.
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
The case is a bit rough, so I decided to swap the case from an faulty Crystal Xbox i have. I will do a 80mm fan mod and some light mods on this. The plan is a green jewel, and green lights under the jewel. The thing I am not sure about yet, is if I shall keep the shield in the lid, remove and show the internals or remove it and black out the internals. (black hdd, black dvd rom, all other gaps covered with black plastic and wires routed under the hdd and dvd trays. Like my other ghostcase crystal. See pics) What do you guys think?
Sent fra min NX551J via Tapatalk
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Removed everything from the crystal case, and gave the plastic and metal parts a good clean
Also removed the clock cap, no sign of any leaks.
Sent fra min NX551J via Tapatalk
Also removed the clock cap, no sign of any leaks.
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
After that it was one for a 80mm fan. Started with removing the clips holding the stock fan, and cutting down the fan to fit in the space. I also cut the hdd tray. After several cuts I finally got it to fit pretty snug, just to realise that it hit the plastic on the side of the power connector. So I trimmed the fan a bit more, and also cut off a bit of the plastic on the connector on the psu. When I was happy with the fit, I made holes in the metal to fasten the fan, cleaned up the cuts. A final test fit, and I was happy with the results. The pictures show the progress.
Sent fra min NX551J via Tapatalk
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Did a test run on the Xbox after fan mod and clock cap removal, and I got this weird sound that seems to come from the psu may it be a sign that it will fail soon? Could it be other stuff?
Also both my extra dvd drives failed on this Xbox, can't read the discs. Sometimes I get unknown disc in dvd2xbox, sometimes I just hear the laser moving. Could this be linked to a failing PSU? I am pretty sure at least one of these dvd drives where working.
Sent fra min NX551J via Tapatalk
Also both my extra dvd drives failed on this Xbox, can't read the discs. Sometimes I get unknown disc in dvd2xbox, sometimes I just hear the laser moving. Could this be linked to a failing PSU? I am pretty sure at least one of these dvd drives where working.
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Went on and mounted diodes under a new green jewel. Thought the result was pretty decent myself. Wiring not finished, but tried the diodes to see how it looked
Sent fra min NX551J via Tapatalk
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- PhobosDevourer
- Posts: 35
- Joined: Sun Apr 17, 2016 3:54 am
- Has thanked: 4 times
- Been thanked: 2 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
that looks pretty awesome man!
good job!
good job!
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Where do you get the Shell from? I need that in my life! Looks amazing man
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Thanks, I am happy with it too. One of the diodes are acting up though, so may redo it. Maybe with a few less diodes, it got very bright like it is now (6 diodes)PhobosDevourer wrote:that looks pretty awesome man!
good job!
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
This is a standard crystal case, with green jewel and green lights. I also have a ghostcase Xbox. It will come in this thread later.Hodge92 wrote:Where do you get the Shell from? I need that in my life! Looks amazing man
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- PhobosDevourer
- Posts: 35
- Joined: Sun Apr 17, 2016 3:54 am
- Has thanked: 4 times
- Been thanked: 2 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
When I do ewels i go super lazy and just add a tiny led strip all around tbh, it is bright, but I set them behind tvs
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
The crystal/green one is now given the name "The Hulk".
Sent fra min NX551J via Tapatalk
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
I started a bit of work on "The Pink Devil" today.
Mods done to this box earlier:
-"mod inside" jewel with pink leds
-80mm fan
-silent gpu fan
-new thermal paste
-softmod
-bigger hdd
It was originally a US Xbox, so I used a 220v to 110v converter. Since the step down converter started acting up, I decided it was just as cheap to change to a 220v psu. So I was going to change this, do a clean up and remove the clock cap.
The only challenge to this was that I needed to cut the 80mm fan even more with the "new" psu (got it an more good stuff from N64 freak).
The clock cap hadn't leaked, it was just dirty underneath.
I also updated the softmod to rocky5 latest, installed xbmc4gamers, nulled hdd key and started to set it up for my Xbox for original games.
Added pictures at the end, since Tapatalk don't let me at put the pictures within the text.
Further for this box is probably trying the controller port light mode with pink leds just to make a bit cooler. I may also try the power/eject light mod.
Sent fra min NX551J via Tapatalk
Mods done to this box earlier:
-"mod inside" jewel with pink leds
-80mm fan
-silent gpu fan
-new thermal paste
-softmod
-bigger hdd
It was originally a US Xbox, so I used a 220v to 110v converter. Since the step down converter started acting up, I decided it was just as cheap to change to a 220v psu. So I was going to change this, do a clean up and remove the clock cap.
The only challenge to this was that I needed to cut the 80mm fan even more with the "new" psu (got it an more good stuff from N64 freak).
The clock cap hadn't leaked, it was just dirty underneath.
I also updated the softmod to rocky5 latest, installed xbmc4gamers, nulled hdd key and started to set it up for my Xbox for original games.
Added pictures at the end, since Tapatalk don't let me at put the pictures within the text.
Further for this box is probably trying the controller port light mode with pink leds just to make a bit cooler. I may also try the power/eject light mod.
Sent fra min NX551J via Tapatalk
Last edited by LudviG on Sun Dec 30, 2018 12:32 am, edited 2 times in total.
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Now I am at a loss. The Pink one suddenly died while I was looking at settings in xbmc4gamers. It gets power, power down after few second. Then power on again and start to flash red and green. No picture on the tellie.....
What could it be?
Sent fra min NX551J via Tapatalk
What could it be?
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
So the Xbox frags ( flash’s red and green ) that topical a hardware issue of some kind.
So the GPU could have died, or the southbridge eg...
Unless you can see a fault it’s a dud Xbox. Try changing IDE cables and dives eg..
So the GPU could have died, or the southbridge eg...
Unless you can see a fault it’s a dud Xbox. Try changing IDE cables and dives eg..
Download Xbox Softmodding Tool & Extras Disc
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
XBMC4Kids Mod
Xbox Gamertag = Connxtion
PSN ID = JCRocky5
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
That sounds typical after actually putting some work into it I will try changing stuff then, when I find the time again.Rocky5 wrote:So the Xbox frags ( flash’s red and green ) that topical a hardware issue of some kind.
So the GPU could have died, or the southbridge eg...
Unless you can see a fault it’s a dud Xbox. Try changing IDE cables and dives eg..
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
I got back at work, and got the time to look at this one. And now it boots, and works. I will try to use it a bit now and see if it works after some use too. Either way, this is weird.LudviG wrote: ↑Mon Nov 13, 2017 7:08 amThat sounds typical after actually putting some work into it I will try changing stuff then, when I find the time again.Rocky5 wrote:So the Xbox frags ( flash’s red and green ) that topical a hardware issue of some kind.
So the GPU could have died, or the southbridge eg...
Unless you can see a fault it’s a dud Xbox. Try changing IDE cables and dives eg..
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Got 2 new Xboxes, and some other goodies in a lot. Both are chipped (supposed to be Xecuter2 in both) these are the first working chipped one I got, so will make an thread with question on how to get them up to date, and post the WIP in this thread.
Both worked when seller sent them, but 1 get the service screen when I boot now. I fear it has gotten beaten up in transit. I will see if I can get up and running again. Both got stuck dvd drives ofc.
I also got 3 controllers. 1 duke, 1 small and one logitech wireless. Another one with stick and trigger issues. Maybe I can get this one to work properly?
Ms scart cable, Ms HD kit, monster component and a xcm multiconsole component one. Haven't tried any of these yet.
Also got 2 unused controller extensions and a Hitachi ide drive.
The box that boots seems to have a 60gb hdd in it.
Sent fra min NX551J via Tapatalk
Both worked when seller sent them, but 1 get the service screen when I boot now. I fear it has gotten beaten up in transit. I will see if I can get up and running again. Both got stuck dvd drives ofc.
I also got 3 controllers. 1 duke, 1 small and one logitech wireless. Another one with stick and trigger issues. Maybe I can get this one to work properly?
Ms scart cable, Ms HD kit, monster component and a xcm multiconsole component one. Haven't tried any of these yet.
Also got 2 unused controller extensions and a Hitachi ide drive.
The box that boots seems to have a 60gb hdd in it.
Sent fra min NX551J via Tapatalk
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.
- xman
- Posts: 1289
- Joined: Wed Jul 04, 2012 2:30 pm
- Location: Sydney, Australia
- Has thanked: 55 times
- Been thanked: 168 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
Check the chip is still fully in it's socket on the non booting machine.
Check the DO wire is in place.
If that doesn't help, resolder the pins.
If that doesn't help resolder the socket.
If that doesn't help your chip has dropped it's content.
Solution, boot any modded Xbox and once booted insert the faulty modchip while the machine is still ON and you "must connect the DO wire"
Insert a Xbox build disc and reflash the faulty modchip bios.
Turn machine off once done and swap the modchip back over.
Duox modchips do this "drop there guts" regularly. Better using a simple Alladin. Once they are setup properly they never fail.
Check the DO wire is in place.
If that doesn't help, resolder the pins.
If that doesn't help resolder the socket.
If that doesn't help your chip has dropped it's content.
Solution, boot any modded Xbox and once booted insert the faulty modchip while the machine is still ON and you "must connect the DO wire"
Insert a Xbox build disc and reflash the faulty modchip bios.
Turn machine off once done and swap the modchip back over.
Duox modchips do this "drop there guts" regularly. Better using a simple Alladin. Once they are setup properly they never fail.
- LudviG
- Posts: 267
- Joined: Sun Jul 15, 2012 10:05 pm
- Location: Norway
- Has thanked: 29 times
- Been thanked: 13 times
Re: Ludvigs Xboxes, WIP and finished results (until next mod :p)
I'll look at that xbox soon. I hope it is an easy fix, with no soldering. I am i dire need of a proper soldering iron, the ones I got are all cheap ones that are best for...... well actually nothing.....xman wrote: ↑Tue Jan 30, 2018 1:22 am Check the chip is still fully in it's socket on the non booting machine.
Check the DO wire is in place.
If that doesn't help, resolder the pins.
If that doesn't help resolder the socket.
If that doesn't help your chip has dropped it's content.
Solution, boot any modded Xbox and once booted insert the faulty modchip while the machine is still ON and you "must connect the DO wire"
Insert a Xbox build disc and reflash the faulty modchip bios.
Turn machine off once done and swap the modchip back over.
Duox modchips do this "drop there guts" regularly. Better using a simple Alladin. Once they are setup properly they never fail.
What is DO wire? I think i know what wire it is, but why is it called DO?
Never argue with an idiot! First he brings you down to his level, then he beats you with experience.