Xbox Version 1.1 with Xecuter 3 not booting

Discussion about Modding the XBOX, including hardware and software hacks.
Post Reply
MikeH
Posts: 24
Joined: Wed Nov 28, 2012 4:10 pm
Has thanked: 6 times

Xbox Version 1.1 with Xecuter 3 not booting

Post by MikeH »

I just acquired an Xbox Version 1.1 with Xecuter 3 chip but Xbox does not fully boot. I do see Boot screen but stays stuck with no error. I have press the white button to try and get to Config page for the chip but no go... I've also tried to load bios by disabling chip and setting switches to on, on, off, off, off but Xbox gives me error under MS dash. Any help and comments welcomed. Thanks
User avatar
Nextelhalo
Posts: 725
Joined: Wed Jul 04, 2012 5:55 am
Location: Yoyorast Island
Has thanked: 61 times
Been thanked: 77 times

Re: Xbox Version 1.1 with Xecuter 3 not booting

Post by Nextelhalo »

What do you see on the screen when it boots up? You could always try to hold down the power and eject button when you start it up (do a long press dont hold) and see if that boots it into the Flashbios backup. Does the chip light up blue when it's on?
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
User avatar
RoyalX
Posts: 251
Joined: Wed Jul 04, 2012 6:12 am
Has thanked: 2 times
Been thanked: 9 times

Re: Xbox Version 1.1 with Xecuter 3 not booting

Post by RoyalX »

Try all the banks with the dip switches. Maybe you accidentally touched a switch during transport.

See picture for settings:
Image
Post Reply