Xbox Version 1.1 with Xecuter 3 not booting
Xbox Version 1.1 with Xecuter 3 not booting
I just acquired an Xbox Version 1.1 with Xecuter 3 chip but Xbox does not fully boot. I do see Boot screen but stays stuck with no error. I have press the white button to try and get to Config page for the chip but no go... I've also tried to load bios by disabling chip and setting switches to on, on, off, off, off but Xbox gives me error under MS dash. Any help and comments welcomed. Thanks
- Nextelhalo
- Posts: 725
- Joined: Wed Jul 04, 2012 5:55 am
- Location: Yoyorast Island
- Has thanked: 61 times
- Been thanked: 77 times
Re: Xbox Version 1.1 with Xecuter 3 not booting
What do you see on the screen when it boots up? You could always try to hold down the power and eject button when you start it up (do a long press dont hold) and see if that boots it into the Flashbios backup. Does the chip light up blue when it's on?
Halo LE Blue (Japan Black jewel) v1.0 1.0GHZ Trusty 128 RAM 640GB Blue-White P/E LED's
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched
White v1.4 X3 CE with X3 CP 500GB Blue-white P/E LED's Blue Jewel
Debug kit untouched