XBMC4Xbox

To avoid confusion, Xbox Halo 2 Ice Blue and Xbox Kasumi-chan Blue are not the same.
Xbox Kasumi-chan Blue is much more rare, only 5000 where made. $351 CAD was a total steal.

http://www.consolecolors.com/microsoft.html#Xbox

http://en.wikipedia.org/wiki/Xbox_%28co ... d_editions

Honestly I started with a White Crystal Soft Modded Xbox with just a 500GB HDD knew nothing about hard mods or Soldering. I did a huge amount of digging/finding people, Forums, Different Sites. Spent tons of time and money, waiting and getting extremely lucky. I can Imagine I spent over $3000 so far on the xbox altogether... The Hard Truth. Things like this I should have done way back in 2004 it's way too late now things are scarce, extinct. I'm really surprised theres actually a good amount of people who still fiddle with this old xbox to be honest.

The Funny thing is that theres a even rarer Kasumi chan Xbox that says Dead or Alive "Online" not "Ultimate" the guy in japan sold it on ebay as the original bundle with the controller,xbox live, dvd remote. the only thing i didnt get was the kasumi body pillow with it. he said the console was junk the dvd drive made noises but for that price I immediately bought it. when i finally got my hands on it of course they come with a retail Thompson drive and they just suck in general lol, but the insides of the dead or alive console was so brand new there wasnt a spec of dust or dirt. i didnt understand how it was played enough to have a broken drive.

In case you guys missed it in my "for sale on ebay" post.
Rare limited Kasumi-Chan Blue Dead Or Alive DOA Xbox Console http://r.ebay.com/NjUt3d
At time of writing, £105.00 plus £24.49 postage. Located in Sheffield UK, finishes tomorrow.

That's a good deal but with bidding you never know how much you're going to pay :/

All hand painted with model paint, by my brother-in-law.

That is awesome. It's like a green R2-D2. Nice touch with the controller numbers. What kind of paint did you use and did you create a custom stencil ?

Just bought a fan for mine and my friends xbox (his is the youtube link)

https://www.youtube.com/watch?v=DevHj67XydI

XC-3730C wrote:That is awesome. It's like a green R2-D2. Nice touch with the controller numbers. What kind of paint did you use and did you create a custom stencil ?

My brother-in-law did the paint job, with a brush, all by hand, no stencils. I'm not sure what kind of paint he used, it may have been model paint? I will ask him when I see him again

Spec: UK PAL v1.2, Ind-Bios 5003-67, Samsung DVD, standard 10gb Seagate hard drive, XBMC4Xnox 3.5...

Still to-do: bigger hard drive, at least a 160gb. Will be for sale soon, with 1 controller, DVD dongle and remote, mains lead, maybe a HD AV lead, and wireless dongle? Price ? not sure yet?

All hand painted with model paint, by my brother-in-law.
This console will soon be for sale

Spec: so far

PAL V1.2 Xbox
TSOPED ind-bios 5003 67
160gb WD IDE hard drive
Samsung DVD-rom
MS DVD remote control and sensor
Boots to XBMC4Xbox 3.5 stable
Emulators
Avalaunch, UnleashX and other Apps
BBC iPlayer plug-in
Viewster plug-in
UK mains cable
Ethernet cable
Game plug to USB adaptor (made this myself)

To-do?

Waiting for AV cable (non HD)
Test a wireless controller, if it doesn't work a wired one will be included
Add a wireless USB pocket repeater

PM me if you have any questions?

The above now for sale in the marketplace

Keep the thread rolling. Now sporting an 80mm blue LED fan and a 200GB drive thanks to Budbandito720.

Hmmm, nice. I have a couple on there way but this one just prompted me to get them done a bit quicker I think. Just last week I got my required parts in. Stay tuned.

Nextelhalo,

How did you do those LED's underneath the system?

Reminds me of low riders back in the 90's

Well guys here's my latest project.

128mb board (no 1ghz)
X3cp from a trade I did with xc3770
X3 chip from n64
Xerc2 from n64
750gb ide
Blue ports
Ms dongle attached to the xerc2

Jewel is black with clear letters, cutting the lid in the next weeks will post more pictures

Nextel halo helped with some of the soldering

https://youtu.be/IZGxbrtUWCU

Nextelhalo wrote:Keep the thread rolling. Now sporting an 80mm blue LED fan and a 200GB drive thanks to Budbandito720.

Im also looking for how to underglow the xbox in the front I know sickmods had a 4.4" LED Board you could install leds to but thats sites gone.
I need a new idea. btw your xbox looks sick

budbandito720 wrote:Well guys here's my latest project.

128mb board (no 1ghz)
X3cp from a trade I did with xc3770
X3 chip from n64
Xerc2 from n64
750gb ide
Blue ports
Ms dongle attached to the xerc2

Jewel is black with clear letters, cutting the lid in the next weeks will post more pictures

Nextel halo helped with some of the soldering

https://youtu.be/IZGxbrtUWCU

The attachment 1434083685696.jpg is no longer available

Hey do you do custom lid cutting too? I wouldn't mind paying for someone for a black top and have it
cut so you can see the dvd drive and having a hole through a clear gem led so light shines through it.
I'm thinking about building a black and red LED X-tender Xbox like my blue one.
kind of like the photo here:

XC-3730C wrote:Nextelhalo,

How did you do those LED's underneath the system?

Reminds me of low riders back in the 90's

4 inch logisys cathode tube. You'll have to remove the tube from the housing gently or you will break the tube. They fit right into the bottom of the face plate and just use some hot glue to secure them. Route your cables and enjoy.

http://www.amazon.com/Logisys-Cathode-L ... B000JQ17V6

Does the ad come with two 4" cathodes or is it one cathode and I buy a quantity of two. Also the x3 control panel is different than a regular panel. I don't even know if these will work. Thanks for posting the ad though.

nigelp12345 wrote:Does the ad come with two 4" cathodes or is it one cathode and I buy a quantity of two[?]

Looks like the clue is in the advert: "Logisys 4" Cold Cathode Light Kit with Dual Tube..."