ide to sata adaptors that worked for me

Discussion about Modding the XBOX, including hardware and software hacks.
Post Reply
User avatar
professor_jonny
Posts: 1296
Joined: Thu Jul 05, 2012 5:41 am
Location: New Zealand
Has thanked: 66 times
Been thanked: 196 times

ide to sata adaptors that worked for me

Post by professor_jonny »

Here is some ide to sata adaptor pictures that worked for me:

Image
User avatar
darknior
Posts: 59
Joined: Wed Jul 04, 2012 3:08 am
Location: France
Been thanked: 4 times

Re: ide to sata adaptors that worked for me

Post by darknior »

Hi

Thanks for the information ...

We are speaking about that here too : http://www.emuxtras.net/forum/viewtopic ... 622#p20622

And i found the one on eBay : http://www.ebay.de/itm/ws/eBayISAPI.dll ... 570wt_1139

I will buy it to try ...

Before i have try it : http://www.dealextreme.com/p/sata-to-id ... 37?item=46
And it is don't works with my 2To and some others i have test :(
User avatar
Venom
Posts: 10
Joined: Wed Jul 04, 2012 2:02 pm
Location: Sunrise, Florida
Contact:

Re: ide to sata adaptors that worked for me

Post by Venom »

I have used a few of the Dealextreme units mentioned above. http://www.dealextreme.com/p/sata-to-id ... 37?item=46

I had a problem with it not working on a 2TB Seagate HD. The solution was to change the IDE cable in the XBOX. I used some newer IDE Cables I had from ASUS Boards and the 2TB Drive started working. This also later happened to me with a 1TB Hitachi Drive. Changing to a newer IDE cable also fixed that one. Using regular computer IDE cables is a little tighter fit due to the spacing of the connectors compared to the XBOX IDE Cable but they do fit.
My Egyptian Tomb Home Theater: http://www.eyecit.net
Post Reply