Page 1 of 1

Logitech Wireless precision Controller

Posted: Mon Oct 26, 2015 10:59 am
by shady7
Hi there, my Logitech Wireless precision Controller is now stopped working, the receiver sits there flashing away. Have replaced batteries no buttons work, only the vibration button, pressed connect on receiver nothing anyone come across this problem could give me some help thanks

Re: Logitech Wireless precision Controller

Posted: Mon Oct 26, 2015 2:24 pm
by RoyalX
Try if calibration will do the trick.

Re: Logitech Wireless precision Controller

Posted: Mon Oct 26, 2015 9:29 pm
by shady7
Thanks Royal tried that any other ideas I love my Logitech controller its the perfect balance for xbmc and playing emulators.

Re: Logitech Wireless precision Controller

Posted: Tue Oct 27, 2015 7:20 pm
by Nextelhalo
Hit the button on the receiver and then hit the white button on the controller to see if it sync's up. That's the only way i've been able to get them back and working. Also make sure another controller (Logitech Precision) is not trying to compete with the signal, if so then do the above method on both controllers.

Re: Logitech Wireless precision Controller

Posted: Fri Oct 30, 2015 6:40 am
by shady7
Thanks Nextelhalo didn't work either the little red light on the controller should blink every time you hit a button and its not doing that so possible fault inside controller? but vibration button works

Re: Logitech Wireless precision Controller

Posted: Fri Oct 30, 2015 5:33 pm
by Nextelhalo
Possibly so but not common from my experience. Pop the controller open and see what it looks like.

Re: Logitech Wireless precision Controller

Posted: Sat Oct 31, 2015 4:41 am
by xman
No signs of battery leaks in the battery compartment?. That is very common.

Re: Logitech Wireless precision Controller

Posted: Sun Nov 15, 2015 3:28 am
by shady7
Hi there just an update pulled controller apart every thing looks mint couldn't see any dry solder joints cleaned with cotton bud and meths put it back together still no go think it may be a chuck out.

Re: Logitech Wireless precision Controller

Posted: Sun Nov 15, 2015 7:31 am
by RoyalX
You tried it with an other receiver?
Strange problem though!

I got a couple of Logitech Wireless controllers. Let me know if you are interested.

Re: Logitech Wireless precision Controller

Posted: Wed Apr 06, 2016 11:21 pm
by GoTeamScotch
Sorry to bump an old thread but if anyone is finding this page through google or searching the forums, you might try this:

When my logitech controller started doing this, I noticed that I could unplug my memory unit and plug it back in and then it would connect to my controller. This worked every time. I'm not sure why it did but I always just kept a memory unit in the receiver for this reason after a certain point. It's not a fix per-say, but I've been doing it this way for years now.

Re: Logitech Wireless precision Controller

Posted: Sun Aug 19, 2018 10:51 pm
by Technocian
GoTeamScotch wrote:
Wed Apr 06, 2016 11:21 pm
Sorry to bump an old thread but if anyone is finding this page through google or searching the forums, you might try this:

When my logitech controller started doing this, I noticed that I could unplug my memory unit and plug it back in and then it would connect to my controller. This worked every time. I'm not sure why it did but I always just kept a memory unit in the receiver for this reason after a certain point. It's not a fix per-say, but I've been doing it this way for years now.
Did you ever figure out the solution to this other than plugging in a memory card? I bought a Logitech Wireless controller and have the same issue. The red light on the controller stops blinking, making it seem like it's paired, but the receiver continues blinking. Only the vibrate button works; pressing any other buttons produces no input on the Xbox.

Some of the things I've tried so far:

-Taking it apart and cleaning all the contacts
-Checking the solder joints, I've attached an imgur link below of the board
-L + Start to re-calibrate the controller
-Connect on the receiver + white button to pair the two
-Attempting to pair to other receivers

https://imgur.com/a/xxhqNfG

The controller is in physically good shape all-around. I'm completely perplexed as to why it won't work.