Thats excellent PJ.

spinnersp wrote:I think this will only work if xbmc4xbox is not running,you have to be in a different dash,I think?

That is the ideal way, so launch unleashx or any other dash before copying the XBMC folder or you will get corruption issues.

Keeping the HD settings is a problem in old softmods so use Rocky's advice and update, if you are hard modded then it may be a cable issue.

Wrong forum mate, only original xbox's here.
Xell is installed onto the nand with the modded dash so you will have to reflash it or take to someone that knows how to do it, hopefully you have a copy of the nand dumps.

Maybe a bad burn or it just doesnt like verbatim's , try another disk brand.

I get your idea but my only concern would be finding a 4:3 lcd panel large enough that will fit the housing neatly and not look like an addon, if you are worried about weight you could use the space under the screen for the hardware so it has a low COG.

I had similar problems with a sata adapter a few months ago and posted about it, turned out 1 of a pair of adapters i got cheap on ebay was faulty and was freezing at this same stage in the process, i had spares of other types so was able get it set up in the end.

Version wont make any difference except i would say V1.0 with the fan on GPU may be noisier any version that is or can be tsop flashed is better.

I have one but a different design.

I have been using a modded xbox as the center of my home theatre setup along with an old Yamaha AV reciever that is probably 15 years, its still able to put out a decent sound but i wanted to upgrade. I was given a newer Onkyo reciever with oiptical, digital coax and component inputs which the yammy...

Aurora doesn't. Use DashLaunch to modify it. But you can put 12V on the fan and you're good to go. It's very noisy but might be a good solution until you find a better one. I heard that a partition in the air duct, presumably between the individual fans, helps decrease turbulence and increase airfl...

If you can get just the dvd kit sensor then almost any universal remote will work, my faves are the logitech harmony's and so far used 300,515,525 and 650.

Falcons are fine, i've done a few jtag and rgh falcons and never had an rrod or overheat.
By new do you mean a 2008 built machine thats never been used ? If its never been used then you can jtag it otherwise you will need to RGH it or R-jtag it.

Another source for new ram chips is here - http://www.utsource.net/

thanks, with non DVD bios I can reinstall HDD without additional apps ? or can I launch apps from USB stick (with xbox controller port mod) ? You will need some way of getting the apps onto the hdd, you cant launch any app from usb but you can copy them from usb to hdd BUT you will need a dash that...

I have a xenium and i just used Hexen to flash IND5003 onto it.

Thanks guys, no it's UN modded, I did some more reading and it seems 16gb usb sticks will work and you can use two or three so that might do the trick, thanks again. With the RJTAG etc can you load a game that you have bought in to memory and still play on line? It's just ill be getting a 360 old t...

fxmech wrote:If it's JTAG, RJTAG or RGH any hard drive up to 1GB will work.

2TB's work in jtag/ RGH.

Could be, Unleashx is old and not updated where as XBMC4XBOX is up to date.

daicon wrote:Apparently another software is Hexen's.. Will that work for setting up the sata drive for the softmod?

Hexen is consoled based and although there are options for softmodding i dont think you can use it to clone a hdd like chimp does.