Search found 100 matches

by Ging3rguy
Sun Mar 29, 2015 10:37 pm
Forum: XBOX Modding
Topic: Winbond using HeXeN
Replies: 16
Views: 6306

Re: Winbond using HeXeN

Sorted, Thanks for the help guys :!: :D
by Ging3rguy
Sun Mar 29, 2015 8:33 pm
Forum: XBOX Modding
Topic: Winbond using HeXeN
Replies: 16
Views: 6306

Re: Winbond using HeXeN

I had that issue before i think it was because the cd was no good. I have been recently using Xblast OS to flash windbond chips works well just put a bios file in c:\bios\ and run the xbe. So, if I just load the bios.bin c:\bios\ and run Gentoox loader it should find it? How can I check the bios is...
by Ging3rguy
Sun Mar 29, 2015 7:57 pm
Forum: XBOX Modding
Topic: Winbond using HeXeN
Replies: 16
Views: 6306

Re: Winbond using HeXEn

spicemuseum wrote:Are you running HeXEn from insertable media (a CD/DVD) or from the hard disc drive?
From the dvd rom. I didn't use hexen for the softmod, could that be the reason? :?
by Ging3rguy
Sun Mar 29, 2015 6:43 pm
Forum: XBOX Modding
Topic: Winbond using HeXeN
Replies: 16
Views: 6306

Re: Winbond using HeXeN

There is no problem with flashing Winbond from HeXen. You must do something wrong. It looks for the bios.bin but it is not putting it in the C partion, it is putting it in E/Hexen . If I move the bios.bin from Hexen in the E partion, do I need to put it in the C/root or the C/Bios folder? :( What o...
by Ging3rguy
Sun Mar 29, 2015 5:53 pm
Forum: XBOX Modding
Topic: Winbond using HeXeN
Replies: 16
Views: 6306

Winbond using HeXeN

Hi, trying to use hexen disk to flash winbond tsop, hexen keeps putting bios.bin in E/Hexen instead of C/Bios. Anybody else have this issue? :oops:
Thanks
by Ging3rguy
Sat Mar 28, 2015 11:46 pm
Forum: XBOX Modding
Topic: LCD mod with an Aladdin
Replies: 8
Views: 2646

Re: LCD mod with an Aladdin

xemium.jpg
xemium.jpg (5.83 KiB) Viewed 2582 times
What about a Xenium clone :?:
by Ging3rguy
Sat Mar 28, 2015 10:59 am
Forum: XBOX Modding
Topic: LCD mod with an Aladdin
Replies: 8
Views: 2646

Re: LCD mod with an Aladdin

professor_jonny wrote:Not all aladdin chips support lcd if it has a 4032 chip on it it is not lcd compatable.
It is imposible* to find one these days.
So it's not just soldering a pot onto the pcb :?: :( There are a lot advertised saying they are lcd compatible, put that is just poop :?: :( Thanks
by Ging3rguy
Fri Mar 27, 2015 6:49 pm
Forum: XBOX Modding
Topic: LCD mod with an Aladdin
Replies: 8
Views: 2646

LCD mod with an Aladdin

Hi Guy & Gals, has anyone done the lcd mod using an Aladdin chip :?: If so is there a guide for it, or is it similar to other lcd installations using other chips :?: :)
by Ging3rguy
Sun Mar 22, 2015 1:22 am
Forum: XBOX Modding
Topic: i Was Running Out Of Xboxes So i Bought Some.
Replies: 102
Views: 22080

Re: i Was Running Out Of Xboxes So i Bought Some.

xman wrote:Hardmod using Slayer's and softmod using HeXEn and then when I get to it, flash TSOP with Slayer's because I use those bioses it has.
I've only done a few but I thought you need the linux game save in place for the softmod to work. I've not tried going from hard to soft to tsop :!:
by Ging3rguy
Sun Mar 22, 2015 1:04 am
Forum: XBOX Modding
Topic: i Was Running Out Of Xboxes So i Bought Some.
Replies: 102
Views: 22080

Re: i Was Running Out Of Xboxes So i Bought Some.

xman wrote:I don't have one of the the required game discs to do a softmod directly. Meaning I need to install a modchip to allow a softmod install disc to load., softmod the machine, boot from the softmod to flash the TSOP.
So are doing a softmod or hardmod install from hexen?
by Ging3rguy
Sun Mar 22, 2015 12:12 am
Forum: XBOX Modding
Topic: i Was Running Out Of Xboxes So i Bought Some.
Replies: 102
Views: 22080

Re: i Was Running Out Of Xboxes So i Bought Some.

I must be doing something wrong doing TSOPs. I am putting in pin headers to run a modchip, attaching the D0 wire and set the chip to auto boot. That is all working correctly. I am getting a machine that will boot the install disc. I install the softmod using the HeXEn disc that appears to load and ...
by Ging3rguy
Sat Mar 21, 2015 10:39 pm
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

Right now I'm really confused. Made up my eeprom reader and wasn't 100% sure it was working properly with the usb to 9 pin serial connector, so I opened up my 1.6 and couldn't get it to read. Then read that 1.6s are a bit trickier to read and I needed to hook it up to the TV and connect after the fl...
by Ging3rguy
Sat Mar 21, 2015 3:48 pm
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

Okay, so I ended up making an eeprom reader just because... Not sure it liked being connected to the computer via a usb to 9 pin serial connector. But after a few tries I managed to lift the info. The serial number matched the box, the only number I was unsure of was 'DVD kit zone 00'. So does this ...
by Ging3rguy
Thu Mar 19, 2015 11:30 pm
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

What Rocky says is probably correct. Your next challenge is to replace the EEPROM data. You're highly likely to need an EEPROM reader/writer and a copy of Ponyprog - and a serial port on a PC. http://www.ebay.co.uk/itm/140521532676 http://www.lancos.com/prog.html http://www.lcdparts.net/Images/DB/S...
by Ging3rguy
Thu Mar 19, 2015 8:16 pm
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

okay, so I tested the voltages out of the power unit and they are good, I could also hear the dvd rom and the hdd power up. :|
by Ging3rguy
Thu Mar 19, 2015 1:30 pm
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

Oh wow, that poor case! :lol: Considering the state of it I'd be inclined to test the power supply, they usually seem to survive most things but you should probably rule it out. The fan kicks in and I did manage to get the dvd rom to eject but only the once, but you can hear it turn. So I think it'...
by Ging3rguy
Thu Mar 19, 2015 11:33 am
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

What is the led error code? ie, flashes Green for 1/2 second 3 times, restarts & solid Green. The above code is a bad eeprom flash, ie, it's corrupt or the wrong eeprom was flashed to the Xbox. ( you will get no video or audio with the above issues ) flashes Green for 1/2 second 3 times, restar...
by Ging3rguy
Thu Mar 19, 2015 9:43 am
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

Well I have been having a read on the internet and I think the problem may be the 2 mosfets in the picture above, the problems are you need to get them off the board to test them and it would cost more to replace them than to get another box :!: :roll:
by Ging3rguy
Wed Mar 18, 2015 10:39 pm
Forum: Misc XBOX Discussion
Topic: Fault finding a FRAG
Replies: 19
Views: 20326

Re: Fault finding a FRAG

Could we get a closer pic of this please? Looks like it could be a trace pulled up. http://i77.photobucket.com/albums/j44/jimmo_2006/lookie%20here_zpsmqhr8pi3.jpg Hi, I have uploaded a few more pics just to show the back of the board, which is very clean when you see the state of the inside of the ...
by Ging3rguy
Tue Mar 17, 2015 11:53 pm
Forum: Misc XBOX Discussion
Topic: Xbox on laptop screen
Replies: 4
Views: 1390

Re: Xbox on laptop screen

nidge wrote:Google this "usb video capture" :)
Okay, but are all usb video capture devices equal? Have you used one you would recommend? :)