The d0 point looks ok. You should be able to reinstall a wire on it although I highly suggest you go for the alternate d0 point on the bottom side of the motherboard. Pulling the wire off like you did could have weaken the epoxy bond between the copper trace and the fiberglass board. Applying heat d...

I got an 1.0 with some kind of Modchip installed on the LPC. This thing will work just as a aladdin modchip on a 1.0/1.1 specifically (I mean it can work on other rev but requires rather extreme modifications to the motherboard). About that wire you "pulled". Did you yanked it out or did ...

Welp it's not working... I'm out of ideas. Looks like there won't be any miracle for you tonight.

Anyway.. is it more complex to do the 28 wire thing or to desolder the tsop? How much for an flash programmer supporting the xbox tsops? Do you know? 28-wire would be more advisable if you're not a seasoned solderer. Personnally, I find it faster to desolder the TSOP and solder it back on but I'm u...

Hum sorry, I was under the impression the Xbox in question was a 1.0. In that case sorry, you're right and 1.4 indeed have 256KB TSOP, so there's no splitting possible... You're left with the 28-wire modchip or desolder TSOP options. I'm not versed in DDS manipulation and such but maybe the problema...

Hey, can I chime in? First of all, tsop_m7 or tsop_d6 will not work if you've got M8+ (partly flashed) on your TSOP, there's no denying that. Long story short, the 2bl on Evox M8+ and everything not M8+ (and X2 5xxx btw) are different and will not unpack a kernel the same way. The TSOP recovery tric...

Hi, I submitted 3 patches on Redmin back in October 2015 and they don't seem to have been touched at all. Issue 346 Issue 347 Issue 348 I updated Issue 347 just now and I figured it would be good just to notify any developer outside here on the forums. Patches include code cleanup, added "Turn ...

Hum, all 4 parts seem good but I'd go for the cheaper one, the JD2-0010NL, just for the sake of it. Probably the most expensive ones are rated for more insertion cycles. In your case, you'll likely insert a cable once in there and be done with it! It's important to note that the datasheet snippet y...

Some of you will be really happy. http://www.assemblergames.com/forums/showthread.php?52381-(WIP)-New-modchip-coming-in certified_genius_award.gif thanks for all psyko_chewbacca , you are the man[/quote] Thanks! Well, I have DuoX2 in my Xboxes and this new chip PCB looks so huge... or is it just co...

Rocky5 wrote:What reason do you have to go to 5960?

Came here to say this. Doesn't the 2016 Softmodding tool works regardless of Dash version?

I just released XBlast OS v0.50. You can have a look at the release thread over AssemblerGames' forums

I think the PSU is slowly dying. If it's a Foxlink PSU, I would check for cracked joints underneath it. It's the kind of issue you can get as the traces under the PCB heats up and restrict current flow. This process can be slow enough to take a couple of hours if you're just on the edge of supplyin...

morpheous wrote:would there be a market for this modchip?

Well it's a niche market. People that just want their Xbox to run homebrew will basically softmod it and be done with it. This modchip is for people who like having more customization options.

I think the PSU is slowly dying. If it's a Foxlink PSU, I would check for cracked joints underneath it. It's the kind of issue you can get as the traces under the PCB heats up and restrict current flow. This process can be slow enough to take a couple of hours if you're just on the edge of supplying...

steeve_madison wrote:anyone got the fuse bit setting for the attiny13 , i have a drive that i need to mod
but i'm not sure for the fuse bit

You got the source code for that chip? I never looked for it but is it widely available?

Biggest issue I can see here is the lack of isolation on the Xbox's side. Ethernet specs requires specific electronic coupling scheme to remove any DC and ground offset between multiple connected devices on the Ethernet bus. A quick look at the 1893AF datasheet, the PHY device used on 1.0 motherboar...

Offline HDD cloner could do the trick. You just need to make sure the unit handles only raw data and does not try to read the file system because most likely, FATX isn't supported! Since there is no software to my knowledge that can resize FATX partitions without losing data, you'll only be able to ...

I've used a laptop IDE DVD-RW drive in one of my Xbox in the past. It was a LG but I don't have the model number on hands right now. I can look it up if you want. Anyway, it was on a 1.6b console and if I recall well, I had a custom Evox M8+ bios with the "Disable DVD drive check" option e...

No problem at all!

I was just worried I might have submitted them in the wrong place.

Found this on the way way back machine kinda what i wanted but it is very complicated think is something like the progseek https://web.archive.org/web/20041208190706/http://warmcat.com/milksop/milksop.html Ok, now I see why you contacted me! If you want to reflash the TSOP you can use a 29-wire mod...