Full https://drive.google.com/folderview?id= ... sp=sharing
Lite https://drive.google.com/folderview?id= ... sp=sharing

I think bios does not matter. There are some games (but only a few) that will not work on console set to different region than game itself. I know 3 games with this problem: Enter The Matrix, LoTR Return Of The King, The Warriors. You need to get NTSC copy to play these games or temporarily change r...

I did that temporarily. Without a fan, GPU was only 2-3 degrees hotter. However, I replaced heatsink with bigger one, just for feel good
Applying new thermal compound will be a good idea.

New 128MB board for sale!
1.1 rev., TSOP flashed, clock-cap removed, pinheader installed. It is possible to split TSOP into 2x512kB.

Worldwide shipping (with tracking)!

http://www.xbmc4xbox.org.uk/forum/viewt ... 612&p=5606

You need SATA to IDE adapter, not IDE to SATA.

If you get compatible SATA-ATA converter, this drive will work.

I take it
I have Philips DVD-drive to exchange for the modchip. Just PM me your address.

No, it will not work with Xbox.
You need an access point or router with AP-Client mode.

Error code 06 means that hard drive is locked with different key than saved on motherboard. It seems this hard drive comes from another Xbox. Have you swapped HDDs between consoles?

What modchip do you have? Post here a picture.
The best, easy and safe way to flash a modchip is HeXEn auto-installer.

You can buy cheap replacements on Ebay. Xbox 360 thumbsticks fit Xbox 1 controllers.
http://www.ebay.pl/itm/Lot-5-Analog-Thu ... 1e7ab51198

Xplorer360, but it will not be faster than FTP.
http://www.afterdawn.com/software/syste ... rer360.cfm

Just put new thermal compound:
http://www.xbmc4xbox.org.uk/forum/viewt ... f=14&t=158

1.5 has ground and 3.3V removed from LPC.
You need to change the bios too. Start X3 in backup mode (both eject&power for a few sec) and flash proper bios.

I think Floydthebarber could fix your modchip.
http://theisozone.com/forum/viewtopic.php?f=33&t=48643

New 128MB board for sale!
1.4 rev., TSOP flashed, clock-cap removed, brand new extra RAM chips, pinheader installed, new Arctic Cooling thermal compound applied.

Worldwide shipping (with tracking)!

It's never too late for Xbox modding!
Interesting and well prepared project. Congratulations

According to datasheet, supply voltage of TSOP31236 should be between 2,5 to 5,5V.

You have to solder D0 from motherboard to SmartXX.

You can enable auto-start with your preferred bios in SmartXX OS.