Still curious on the bus speed of the 1Ghz CPU? is it 133mhz the same as the 733 CPU? I seem to remember the 1.5Ghz DreamX loosing out on power due to its 100Mhz bus... I'm guessing the CPU denotes the speed of the clock so there is no way of overclocking? Also found these:- http://www.fuzing.com/v...

Thanks for the info Professor Johnny

I'm a newb to some terms used but this https://learn.sparkfun.com/tutorials/logic-levels/all article helped me.

EDIT:
From my research on the Intel docs it looks like the steps are as follows?
1.) GHI# Join to VSS
2.) Cut trace BCLK#
3.) Cut trace STPCLK#

the two pins are tied to vcc with pullups internally in the processor core forcing it to startup in a low power state by default even if the if the core voltage is at running at 1.6v. Professor Johnny is VSS the low signal? Would the below info mean join VSS and GHI# for “Maximum performance” mode?...

I find using one side of a plastic ruler workers well personally.

Going back to the pin modifications, am I correct in thinking you need to connect pins GHI# to VCCT to bypass the SpeedStep?? But what two traces need to be cut? EDIT: Actually is GHI# connected to VSS (ground)? Thanks :) Intel's Info: The GHI# signal controls which operating mode bus ratio is selec...

Thank you , loving the YouTube plugin with the login feature working.

Amazing work, very nice mod

Because it is a laptop cpu its running Intel's speedstep technology, and by default clocks down slightly. I remember a post on Xbox Sence when I was researching the cpu upgrade where Trusty mentions he had to modify pins/solder balls for the speedstep. Perhaps there is a pdf on Intel's site with spe...

Is the latest xbmc version using the same provider? I found it works sometimes but more often than not it can't download weather info.

Fantastic!!! Thanks very much

Thanks, I'm glad someone else can enjoy it as well as myself .

Along with giving the the ideas a go xman suggested, I want to try incorporating the "List 2" display option from PM3 into this skin next.

Another place selling new P3 mobile 495 sockets, so you don't need to re-ball the old one.

http://www.ebay.com/itm/495-Pin-BGA-Soc ... 0495007771

Those are some good ideas thanks xman, it's along the same lines I was thinking as well. I will have a go and see what I can do.

Cheers

Yep, I'm keen. What do you have in mind?

I was thought that might be the case that some solder balls are missing, the place I'm talking to has XRay for BGA as well. So can confirm what solder balls are missing on my current board Trusty fitted the socket to. I am aware that the adapter is needed that's almost imposable to make, but I alrea...

What modifications does Trusty do to the motherboard to run the 1.4ghz CPU with the adapter other than fit a socket? I saw a small wire under the motherboard around the CPU area between two traces, but other than that I couldn't spot anything obvious. My Trusty powered Xbox seems to power off by its...

Project Mayhem III HD Skin Mod Info: I have made a few small changes and improvements (IMO) to the PM3.HD skin to suit my needs, basically I have merged the things I liked about the original Xbox Project Mayhem III skin into the PM3.HD version. Things in the new HD skin that have no functionality on...

@Nextelhalo - Cheers, we are lucky in New Zealand its easy to road register almost any Jap import. Your Camaro looks like a beauty aswell, and some very tasteful modifications.

I have a typical Nissan Primera as a daily, but here is my weekend car a R32 Skyline GTR (hence my user name).

Thanks for the comments. @Royalx - Good idea, I did the ones behind the fan, but will do the sides and see what results I get. @Nextelhalo - Good spotting on the rear fan, I originally had it exhausting the air, but then gave pushing the air in a go and found that it did drop the temp quite a bit as...