OP, you said that you did not solder anything, how did you bridged the "TSOP enable write" contacts? Also you have no need to solder the D0 and A15 from my picture, you only stuck the wire in the holes and they can make contact. If you use a too powerfull soldering iron, you risc to break ...

You cannot flash the TSOP if you boot from modchip and viceversa. But there is a workaround (i did not tested it): "1. Insert you booting disc in the DVD drive(HeXen, Auto-Installer...) 2. Tie both D0 and A15 to ground 3. Boot the Xbox with special tsop_m7 bios (from a modchip) 4. Remove D0 fro...

you download xbmc4xbox from this forum, boot evox or alternative dashboard and replace XBMC files in your hdd.

If you know how to solder you can make this reader: And PonyProg as software:
http://www.lancos.com/prog.html

OR you can search for a modchip and then you can use unlocked HDD's

Same thread in "theisozone" forum, the answer of one user was:

Avoid at all costs, known troll and content thief.

Original group channel :
https://www.youtube.com/channel/UCCX0wH ... 7cifrGdrzA

Clone:
https://www.youtube.com/channel/UCykyLG ... LHXMzLjntw

10

hello, thank you for the nice work, do you know when can we have a new version?

Xlink Kai still works and it does not depend of the XBMC version. https://www.teamxlink.co.uk/ You only need a PC running it. There are more complicated ways to run it, but not necessary : you need a router with DD-wrt runing the Kai engine, and and older XBMC version wich has the Kai front end. Thi...

[removed]! thank you sir!

Here! I enter the forum daily.
Merry Christmas, i'm going to Ireland for new years eve!!!

On all my modchips i solder d0 from the mainboard to ground (i use the ground from the screw which is close to LPC header), and on all the modchips i solder bt to ground on the chip board.
This method allways worked for me.

cool! cant wait for it!

Cant wait!

it's better to search a similar donor xbox maiboard or console, and remove the chips from it. (with an hot air gun).

Like you OP, i use Xbox for Burnout 3 and Coinops. I have 250Gb on a SATA HDD (with sata-pata adapter). I use XBMC for music and video, toghether with a Raspberry Pi.

check the kitchen first!

it's verry simple, it's a no solder mod chip. you just have to put a plastic washer under the chip where the screw is, to keep it leveld.
i have one.

any pictures of the console?

Thank you!

same here, would like to se this!

you could flash the bios from within evox dashboard, but you have to manualy download a 256kb bios file.