Hi,
I've just installed a new (second hand) LCD TV. I've replaced the composite cable with a component cable. I've had this setup before on another TV and from memory it worked fine. I don't remember having to change anything to make 720P work, but this time around I've had to install Unleashx dash to change from PAL to NTSC.
When I make the change, the image is blurry, like everything had a shadow.
Any ideas?
Thanks.
PAL to NTSC - blurry
- Dan Dar3
- Posts: 1176
- Joined: Sun Jul 08, 2012 4:09 pm
- Has thanked: 273 times
- Been thanked: 257 times
- Contact:
Re: PAL to NTSC - blurry
You're not saying how your Xbox is modded, and press your TV remote Info button or whatever it will show you the actual resolution it runs on.
It's probably you haven't enabled HD though so it outputs upscaled SD resolution.
http://www.xbmc4xbox.org.uk/forum/viewt ... =14&t=1967
http://www.xbmc4xbox.org.uk/wiki/Enable ... odded_Xbox
It's probably you haven't enabled HD though so it outputs upscaled SD resolution.
http://www.xbmc4xbox.org.uk/forum/viewt ... =14&t=1967
http://www.xbmc4xbox.org.uk/wiki/Enable ... odded_Xbox
- App(s): XBMC4Xbox Remote for Android | Plugin(s): XBMC4Xbox Installer
- Please donate to XBMC4Xbox project to keep it going, every little helps!
- Join us on TeamSpeak
Re: PAL to NTSC - blurry
Thanks for your response.Dan Dar3 wrote:You're not saying how your Xbox is modded, and press your TV remote Info button or whatever it will show you the actual resolution it runs on.
It's probably you haven't enabled HD though so it outputs upscaled SD resolution.
http://www.xbmc4xbox.org.uk/forum/viewt ... =14&t=1967
http://www.xbmc4xbox.org.uk/wiki/Enable ... odded_Xbox
Mine is Hardmodded.
What do you mean by I haven't enabled HD? What settings are you referring to?
Cheers.
- Dan Dar3
- Posts: 1176
- Joined: Sun Jul 08, 2012 4:09 pm
- Has thanked: 273 times
- Been thanked: 257 times
- Contact:
Re: PAL to NTSC - blurry
Enigmah-X > NTSC (B) > restart and enable 720p in XBMC4Xbox settings.
Did you watch the video in the first thread I posted earlier?
If still not getting there, try enabling HD resolutions in MS Dashboard after switching video modes with Enigmah-X.
http://i.imgur.com/3Arw2.jpg
Did you watch the video in the first thread I posted earlier?
If still not getting there, try enabling HD resolutions in MS Dashboard after switching video modes with Enigmah-X.
http://i.imgur.com/3Arw2.jpg
- App(s): XBMC4Xbox Remote for Android | Plugin(s): XBMC4Xbox Installer
- Please donate to XBMC4Xbox project to keep it going, every little helps!
- Join us on TeamSpeak
Re: PAL to NTSC - blurry
Thanks. I had a look at your video and confirmed I was doing everything correct, so I thought it has to be hardware related.Dan Dar3 wrote:Enigmah-X > NTSC (B) > restart and enable 720p in XBMC4Xbox settings.
Did you watch the video in the first thread I posted earlier?
If still not getting there, try enabling HD resolutions in MS Dashboard after switching video modes with Enigmah-X.
http://i.imgur.com/3Arw2.jpg
I'm not using a lead as such but a breakout box which is essentially the lead/plugs/sockets in a box. I have 2 of them. I swapped the box and voila, it works fine now. Must be something wrong with the other box.
Thanks for you help with this anyhow.